Operation Manual

HOW TO MAKE COPIES
- 41 -
1
2
3
4
5
6
3
Open the paper set cover, then Align the
manual feeding paper guides to the paper
length, and close the paper set cover.
"Zoom" screen is automatically displayed.
4
Press [CUSTOM PAPER] on the touch
panel.
5
Key in the dimension.
1) Press [Length] and key in the value. (127mm to
356mm (5 - 14 inch))
2) Press [Width] and key in the value. (64mm to 216mm
(2.5 - 8.5 inch))
3) Press [OK].
Length and width are indicated as shown on the right:
To call up the dimension data registered previously, press
the desired button from [MEMORY 1] to [MEMORY 4],
and then press [OK].
Memo
• To register dimension data into the memory, see the
following page:
 P.42 "Registering non-standard size in the memory"
6
Select other copy modes as required, and
then press the [START] button on the
control panel.
1
2