Copier User Manual
Table Of Contents
- Introduction
- Control Panel and Configuration Menu
- Sending Faxes
- Basic Fax Operation
- Adjusting the Image Quality
- Specifying a Recipient
- Specifying Multiple Recipients
- Sending a Fax at a Specified Time (Timer Transmission)
- Sending a Batch Transmission
- Memory Transmission and Direct Transmission
- Sending a Fax Manually
- Sending a Fax to a Combination of Fax Numbers (Chain Dial)
- Canceling a Queued Transmission
- About the Fax Header
- Faxing From a Computer (PC-FAX)
- Receiving Faxes
- Registering Recipients
- Confirmation Mode
- Troubleshooting
- Appendix
100 Appendix A
Changing Input Mode
Each press of the key switches the input mode between numbers and letters.
[1…]: Numbers can be typed in.
[A…]: Letters can be typed in.
Inputting Example
The procedure for entering text is described below, using “NJ Office” as an
example.
1 Press the 6 key twice.
“N” is entered.
2 Press the 5 key once.
“J” is entered.
3 Press the 0 key once.
A space is entered.
4 Press the 6 key three times.
“O” is entered.
5 Press the 3 key seven times.
“f” is entered.
6 Press the key.
The cursor moves to the right.
7 Press the 3 key seven times.
“f” is entered.
8 Press the 4 key seven times.
“i” is entered.
9 Press the 2 key seven times.
“c” is entered.
10 Press the 3 key six times.
“e” is entered.