Copier User Manual
Table Of Contents
- Introduction
- Control Panel and Configuration Menu
- Sending Faxes
- Basic Fax Operation
- Adjusting the Image Quality
- Specifying a Recipient
- Specifying Multiple Recipients
- Sending a Fax at a Specified Time (Timer Transmission)
- Sending a Batch Transmission
- Memory Transmission and Direct Transmission
- Sending a Fax Manually
- Sending a Fax to a Combination of Fax Numbers (Chain Dial)
- Canceling a Queued Transmission
- About the Fax Header
- Faxing From a Computer (PC-FAX)
- Receiving Faxes
- Registering Recipients
- Confirmation Mode
- Troubleshooting
- Appendix
84 Confirmation Mode
Checking the Transmission/Reception Result
From the Message Window
The results of a maximum of 60 fax transmissions/receptions can be viewed.
In addition, the transmission/reception results that are displayed can be printed
by pressing the Start Mono key.
1 Press the or key to select REPORTS/STATUS, and then press the Enter
key.
2 Press the or key to select TX/RX RESULT, and then press the Enter key.
The TX/RX RESULT screen appears and displays the communications log.
" To return to the Fax mode screen, press the Enter key.
About the Reports and Lists
Reports on the status of fax transmissions/receptions and the speed dial settings
can be printed.
The following reports and lists can be printed with this machine.
" For details on printing the reports and the lists, refer to the following sec-
tion.
Printing the Reports and Lists
1 Press the or key to select REPORTS/STATUS, and then press the Enter
key.
2 Press the or key to select REPORT, and then press the Enter key.
3 Press the or key to select the desired report, press the Enter key, and
then Start key.
The report is printed