Operation Manual

Scanning > 79

For Mac OS X (MC332, MC342, MC352, MC362, MC562, ES3452 MFP, ES5462 MFP)

If using Image Capture scanner drivers:

1. Press the SCAN key on the operator panel.

2. Place your document with text face up in the ADF or face down on the document glass.

3. Press the to select Remote Scan and then press OK.

4. Check that the TWAIN is selected, and press OK.

5. Check that Select a connecting PC is selected and then press OK.

6. Check that From Network is selected and then press OK.

7. Press the to select the destination you want and then press OK.

8. Press

or .

9. If your device’s PC Scan Mode is set to Secure Scan Mode, you must use the Network

Scanner Setup Tool to make the following settings:

>The address of your Mac must be registered with your device.

>The port number used for scanning must be registered. This port number can be

changed in your device’s “Network Scan Destination” settings.

The Network Scanner Setup Tool is installed in the following location:

/Applications/OKIDATA/Scanner/

Start the Network Scanner Setup Tool, select your MFP device and change the

settings.

10. Start Image Capture on your computer.

11. Select the device.

12. Click a scan button.

Scanning starts.

13. Select Quit Image Capture from Image Capture.

If using TWAIN scanner drivers:

1. Press the SCAN key on the operator panel.

2. Place your document with text face up in the ADF or face down on the document glass.

3. Press the to select Remote Scan and then press OK.

4. Check that the TWAIN is selected, and press OK.

5. Check that Select a Connecting PC is selected and then press OK.

6. Check that From Network is selected and then press OK.

7. Press the to select the destination you want and then press OK.

8. Press

or .

9. Start the Adobe Photoshop CS3 on your computer.

10. Select Import from File to select OKI MC5(3)x2_ES5(3)4x2 Network.

If you select OKI MC5(3)x2_ES5(3)4x2 Network and the network scan is the

second or more scanning, proceed to the step 13.

11. For the first network scan, the dialog box indicating that the tool of connection

destination selection is started is displayed, and then click OK.

MONO

OLOR

MONO

OLOR