Operation Manual

Configuring the scanning to Local and Remote PCs > 38
U SEFUL F UNCTIONS FOR S CANNING TO L OCAL AND R EMOTE PC S
This section explains useful functions for scanning to local and remote PCs.
S ETTING PC S CAN M ODE
You can select either simple scan mode or secure scan mode for scanning to local PC
function.
1. Press the SETTING key.
2. Press the to select Admin Setup and then press OK.
3. Enter the administrator password.
4. Select Enter and then press OK.
5. Press the to select Scanner Setup and then press OK.
6. Press the to select TWAIN Setup and then press OK.
7. Press the to select PC Scan Mode and then press OK.
8. Press the to select a mode and then press OK.
9. Press the until the top screen appears.
E NABLING THE N ETWORK TWAIN S ETTINGS
Do the following procedure to use scan to the local PC and scan to remote PC functions
connecting to network.
1. Press the SETTING key.
2. Press the to select Admin Setup and then press OK.
3. Enter the administrator password.
4. Select Enter and then press OK.
5. Press the to select Scanner Setup and then press OK.
6. Press the to select TWAIN Setup and then press OK.
7. Check that Network TWAIN is selected and then press OK.
8. Press the to select ON and then press OK.
9. Press the until the top screen appears.
E NABLING THE WSD S CAN
To use both the Scan To Local PC (WSD Scan) function and the Scan To Remote (WSD
Scan) function via the WSD Scan connection, follow the steps below.
1. Press the SETTING key.
MEMO
To enter the Admin Setup menu, a password is necessary. The default
password is “aaaaaa".
NOTE
If you select Disable on this function, you cannot use scan to local PC and
scan to remote PC via network.