Operation Manual

Loading paper > 21

ULTI

PURPOSE

TRAY

1. Open the multi purpose tray and press gently down on the paper platform (1) to

ensure it is latched down.

2. Load the paper and adjust the paper guides (2) to the size of paper being used.

> When printing on headed paper load the paper into the multi purpose tray with

pre-printed side up and top edge into the MFP.

> Envelopes should be loaded face up with top edge to the left and short edge into

the MFP.

> Do not exceed the paper capacity of about 50 sheets or 10 envelopes. Maximum

stacking depth is 10mm.

3. Press the tray latch button (3) inwards to release the paper platform, so that the

paper is lifted and gripped in place.

4. Set the correct paper size for the multi purpose tray in either the Media Menu

(printer menu settings) or Print Menu (scanner menu settings). See “Configuration”

on page 26 for details.

NOTE

Before closing the multi purpose tray, paper platform (1) must be latched

down.

NOTE

You only need to update one menu; the scanner and printer menus

automatically synchronise to ensure the information is consistent.