Operation Manual

Operation > 66
Receiving a Fax
Your MFP is set to receive faxes automatically, if you wish to change this to manual receive
refer to “Manual receive” on page 54 for details.
A DVANCED OPERATION
Accessing additional settings
To use the advanced features, press the Fax Mode button (1) on the control panel and then
the Additional Settings button (2) to prompt the Additional settings screen.
Below is the menu for the “Additional Settings”. If there are any changes made, the settings
will return to the these factory default settings when you press the Reset button (3).
NOTE
If the MFP is sending a fax, then any incoming faxes will be rejected.
During other functional operations, for example copying, filing, e-mailing,
etc., then any incoming faxes will be stored and printed out when the MFP is
available.
NOTE
For illustration purposes only, the advanced features shown are as accessed
from the scanner control panel, they can also be accessed from the web page
and the MFP Network Setup Tool.
FUNCTION DEFAULT SETTINGS
Quality Fine
Density 0
Doc size A4
Delayed time Real time
Manual feed Off
Poll to receive Off
Overseas Mode Off
2
1
3