Operation Manual

Configuring the scanning to Local and Remote PCs > 31
4. Click Scan to start scanning.
If you want to finish the setting, click Quit.
Starting a Scan Job (for Mac OS X)
1. Press the SCAN key on the operator panel.
2. Place your document with text face up in the ADF or face down on the document
glass.
3. Press the to select Remote PC and then press OK.
4. Start Adobe Photoshop CS3 on your computer.
5. Select Import from File and then select OKI MC5(3)x2_ES5(3)4x2 USB or OKI
MC5(3)x2_ES5(3)4x2 Network.
> When OKI MC5(3)x2_ES5(3)4x2 USB is selected, proceed to the step 9.
> When OKI MC5(3)x2_ES5(3)4x2 Network is selected, the network scan is the second
or later time, proceed to the step 9.
6. For the first network scan, the dialog box indicating that the tool for selecting a
connection destination is started is displayed. Then, click OK.
7. On the dialog box of Scan Settings, select a connection destination to register host
information if necessary, and then click OK.
8.
Select Import from File of Adobe Photoshop CS3 and select OKI MC5(3)x2_ES5(3)4x2
Network
.
The windows appears.
9. Click the scan button.
Scanning starts.
10. Select Quit Photoshop from Photoshop.
Changing Settings (for Macintosh)
You can adjust how the document is scanned by changing the driver setting.
The following explains the setting items.
Simple Mode
You can change the settings of five registered buttons.
1. Follow the procedure for “Starting a Scan Job (for Mac OS X)” on page 31 through
step 8.
2. Select Simple from Mode.
3. Click Settings.
A window appears.
4. Click the scan button to change the settings.
5. Click OK.
6. If you start a scan job, click the scan button.
If you want to finish the setting, click Quit.
REFERENCE
For details on how to change each setting, refer to the online help.