Operation Manual

Configuring the scanning to Local and Remote PCs > 36
> Method to add a new network scanner
To add a new network scanner, select Add Scanner from the Scanner menu, and
select scanner driver name of the added scanner.
> Method to change a scanner driver name
When a scanner driver name has been changed, select Edit Driver Name from
the Scanner menu and then change the scanner driver name.
> Method to change the setting information of the machine
When the IP address of the machine and port number of the machine have been
changed, start Network Configuration and then select Edit Scanner from the
Scanner menu.
The setting value set in the current computer is displayed, and then change the IP
address and port number of the machine.
> Method to set Scan To Local PC
To execute Scan To Local PC, you need to register the computer name, IP address
and port number in the machine.
After installing the scanner driver, start Network Configuration and select the
driver to be used. Then, select Properties from the Scanner menu and select the
Register tab. As the computer information, the computer name, IP address and
port number are displayed. The computer name does not have to be set since the
computer's host name is automatically acquired.
Although the setting value of the computer is automatically displayed for the IP
address, if multiple network cards are installed in the computer, multiple IP
addresses are displayed. Select the IP address of the network card currently used.
Further more, for the port number, the current setting is displayed. If you need to
change, change the setting.
After all settings are complete. Click Register button to register the setting in the
machine.