Operation Manual

Troubleshooting > 163
Warning <%COLOR%> Toner Regional Mismatch The region ID of toner cartridge is not proper
to the distribution channel.
Warning Non Genuine <%COLOR%> Toner Toner cartridge RFID chip is not compatible.
Warning Error Postscript An error has been detected:
> The job has a grammatical error.
> The page is complicated, and VM was used
up.
Warning <%COLOR%> Image Drum Near Life Indicates image drum is near the end of it’s
life. Order replacement image drum(s).
Warning Fuser Unit Near Life Indicates fuser is near the end of it’s life.
Order replacement fuser.
Warning Belt Unit Near Life Indicates transfer belt is near the end of it’s
life. Order replacement transfer belt.
Warning Please Change Fuser Unit Notifies the life of the fuser. This is a warning
only.
Warning Please Change Belt Unit Notifies the life of the belt. This is a warning
only.
Warning <%COLOR%> Toner Low Indicates Toner quantity is low.
Warning Please Install <%COLOR%> Toner This warning appears when the cover is
opened and closed or when machine Power is
switched OFF/ON after a waste-toner full
error occurs.
Warning <%COLOR%> Toner Empty Toner empty.
Warning status takes effect at Cover Open/
Close. Allows printing approx. 50 pages (A4
5% duty, density 5%).
Warning <%COLOR%> Toner Not Installed Notifies that the toner cartridge is not
installed.
Warning Please Install New <%COLOR%> Image
Drum
Notifies the life of the drum. This is a
warning only.
This warning appears when the cover is
opened and closed just after the drum life
error occurred.
Warning <%TRAY%> Missing Indicates paper tray(s) are not installed.
Warning <%TRAY%> Empty Tray empty. Treated as a warning until
printing from that particular tray is required.
Warning File System is Write Protected An attempt to write in a read-only file.
This is a temporary warning, it remains until
the end of the job then disappears.
Warning Memory Overflow
Memory Overflow
Memory overflow occurred in the collate
print.
Warning Memory Overflow
Press <Stop> key
Memory overflow occurred during PC fax job
receiving.
Press the Stop button to return to the default
screen.
STATUS /
CODE
MESSAGE MEANING / ACTION