Operation Manual

Even if your printer is set to proportional mode, the column width
will still be set in normal character size.
Warning: Any graphics data after the right margin will be lost. With text this is
not the case. Should your text exceed the right margin, the first character that goes
beyond the limit
set will become the first character on the next line.
The Set Vertical Format Unit command has the same function as
the Vertical Tab set (ESC B) but for 8 different channels (n= 0 ... 7).
In this
way it is possible to define up to eight groups each with up
to 16 vertical tabs which can be called up with the select Vertical
Format Unit command.
Vertical format unit Decimal Hex. ASCII Comp.
Set vertical format unit
27 98 n
IB 62 n
ESC bn ml
F
ml...m16
0 ml..m16 00
... ml6NUL
Select vertical format unit 27 47 n lB 2F n ESC I n F
This selects one of the 8 Vertical Format Units that were set up with
the command 27 /98/n/m1 ... m16/0. Wheren is then umber of the
channel (n=O to 7), and m is a specific line number and can be from
1 to 255.
Note: At power up the VFU channel n is set to 0.
Epson FX Mode Standard Features 5-17