Operation Manual

Miscellaneous Features
Delete last character
Delete last character
Delete last c haracter
The CHR$(127) code deletes the last character data that was input
in the print buffer.
If the code to be deleted was a space, CHR$(32), one space will be
deleted on receipt of this command. If the last data was a horizontal
tab skip, then
only one space will be deleted-not the whole skip.
If the data which is to be deleted is in the form of Bit Image
Graphics
data then this command is ignored.
Master reset
You can reset your MICRO LINE to its default menu settings, clear
the
print buffer, and set the Top Of Form to the current printhead
position. If RESET INHIBIT is YES in the menu this command will
be ignored.
Master reset
Decimal Hex. ASCII Comp.
'vf.aster reset 27 64 113 40 ESC@
F
Print Suppress
Print suppre!>s Decimal Hex. ASCII Comp.
l'rint suppress on 19
D
OC3 F
Print suppress off
17
11
OC1
F
After the printer has received the DC3 code it will ignore all further
data sent from the host until the code DCl is received. Th e data
will not be stored or printed .
.5-18 Epson FX Mode Sta,dard Features