Operation Manual

Graphics
The following control codes are the same as the IBM-mode.
ESC K nl n2 single density
ESC L nl n2 double density half speed
ESC Y n 1 n2 double density normal speed
ESC Z n1 n2 quad density
Please refer to IBM Graphics in Chapter 5 for an explanation of
these commands.
The Epson-mode offers
an additional way to select bit image
graphics.
Select bit-image graphic density
Bit Image Graphic Density
Decimal Hex ASCII Comp.
Select bit image graphic density 27 42 p n1 lB 2A p nl ESC • p nl F
n2 n2 n2
The parameter "p" defines the graphic mode
p
Mode Dots/inch
0
'\;ormal
densitv
60
1 Dual density
120
2 Dual density, 120
double speed
3
Quad density 240
-t CRT graphics 80
5 Plotter graphic~ 72
(1 :1)
6 CRT graphics II
90
7 Plotter graphics, 144
double density
Note: Modes 0 to 3 are the same as ESC K, L, Y and Z. In mode 2 and 3 adjacent
dots cannot be printed.
Epson FX Mode Advanced Features 6-11