Operation Manual

ManualsBrandsOki ManualsPrinterML3410

SELECT button: Selects

or

deselects

the

printer.

When

selected,

the

printer

is

ready

to receive data;

when

deselected, it will

not

print. Pressing this

button

during

a self-test will

terminate

the

test

and

return

the

printer

to

its

ready

state.

SELECT lamp: Lights

when

printer

is selected

(ready

to receive

data); goes

out

when

it

is deselected.

The

light

blinks

when

the

printer

is

in

Print

Suppress

mode

(refer to

the

Menu

Settings for

more details).

PRINT

QUALITY: Selects the

quality

of

print

of

the typeface.

CHARACTER PITCH: Selects

the

size

of

the

printed

characters.

PRINT

QUALITY

and

CHARACTER PITCH:

When

these

two

buttons

are

pressed

at

the

same

time, while

the

printer

is on-line,

the

Menu

Select

Mode

is activated.

PARK: Selects the

park

position for

continuous

paper,

allowing

single sheets to fed from

the

front

of

the

printer.

TEAR: Advances the

paper

to

the

tear off

position

(serrated

bar

above acoustic cover), allowing

continuous

paper

to

be

torn

off

at

random.

MICRO

FEED: A.dvances

the

paper

1/144

inch

in

the

direction

of

the

arrows

for fine adjustment.

When

pressing

the

MICRO FEED

button

together

with

the TOF

button

the insert position for

paper

is

set.

The

following

buttons

have

special functions

when

you

hold

them

down

while

turning

the

printer

on:

LINE FEED: Activates the

print

samples

self-test.

LINE FEED

and

SELECT: Resets

the

Menu

to

the

factory

settings.

FORM FEED: Activates the rolling ASCII

print

self-test.

2-

2 Operatiou