Operation Manual

Double Width Decimal
Hex. ASCII Comp.
Begin double width printing
14
OE so
f'F
for one line
Cancel double width printing
20 14 DC4 PF
for one line
Begin double width printing 27 87 49 1 B 57 31 ESCW1 PF
(not cancelled bv end of line)
Cancel double width printing 27 87 48 1 B 57 30 ESCWO
f'F
Note: Double width printing in 10 CPI and 12 CPI can be combmed with '\Jear
Letter Quality, empha5ised, and enhanced printmg. The ESC W 1 command
takes priority over the SO command.
Double Height and / or Decimal
He;\.
ASCII Comp.
Double Width
Begin double height and/or
279164 nl 1B5B40n1
ESC I® n1 J'
double width printing n2mL.m4 n2 m1...m4 n2 m1...m4
~
This command is only for the Proprinter mode and sets either
double height, double width or both, together with the control of
line spacing. The table overleaf will help you choose the correct
command for your requirements.
nl and n2 are the number of bytes in the ~equence. Normally this
will
be four so nl = 4 and n2 = 0.
ml to m4 are the modes available. m1 and m2 are ignored and are
therefore constantly set at 0. m3 defines character height and line
feed value. m4 defines character width.
IBM Modes Sta11dard Features 3-3