Operation Manual

Vertical tabs
The command VT advances the paper to the next vertical tab stop
position. If automatic carriage return is on, a CR is done after each
VT.
In Epson or Proprinter mode, if the next tab stop is greater than the
form length (or
the form length minus skip perforation) or no
vertical tab stops are
set a VT is treated as a line feed.
Up to 16 Vertical Tabs can be set in the Epson mode or up to 64
positions on a page in Proprinter XL mode . The vertical tab
positions
are to be set in lines. The line at the top of the form is line
number 1.
Vertical Tabs
Decimal
Hex. ASCII
Comp.
Set vertical tabs 27 661 ... 1B 42 01 ... ESCBSOH
PF
640 4000
. .. @NUL
Cancel vertical tabs 27660
1B 42 00 ESCBNUL PF
Skip to next vertical tab 11 OB
VT
F
Clear vertical tabs and set 27 82 1B 52 ESC R
p
horizontal tabs•
• Horizontal tabs are set at every 8th position, starting at column 9.
3- 24 IBM Modes Standard Features