Operation Manual

Home Head Decimal Hex. ASCII
Comp
Home head 27 60 1B3C
E SC <
F
Backspacing
A backspace command is not acted on by the printer until a
character
or print command is given after it. If you want to
backspace repeatedly to
make several different combined symbols,
add the BS command after each character followed by the
overprinted character. If superscript printing is indicated, a BS
command causes the printer to perform a reverse linefeed to the
backspace position
and then prints the next character as a
superscript. Alignment is not guaranteed.
To
print one character and then move the printhead to the left and
back over it to print another character, use the backspace command.
This
command helps create symbols not included on your
keyboard, such as the plus/minus (±)sign, a cent sign and a less
than
or equal to sign.
Note: A backspace will not be performed beyond the left margin.
Backspacing Decimal Hex. ASCII Comp
Execute back 'pace
8
08 BS P F
Automatic line feed
When the automatic line feed is on, theprinterdoes a line feed each
time
it receives a carriage return (CR).
Automatic Line Feed Decimal Hex. ASCII Comp
Automatic line feed on
27 5 3-1 9
lB 35 31 ESC 5 1
p
Automatic line iced off 27 53 48 1 B 15 30 E SC 5 0
p
IBM Modes Standard Features 3 - 27