Operation Manual

If you are working with a Dual Bin Cut Sheet Feeder you can use
the following commands to select between the bins:
Function Decimal Hex.
ASCII Comp.
Bin 1 27 25 49 181911 ESC EM 1 Pf'
Bin 2 27 27 50 IB 19 32 ESC E\.12 rr
A separate TOF can be set for each of the bins on the CSF. This
enables you
to print on letter-headed paper, fed from one bin,
leaving a large margin, followed
by printing on pages fed from the
other bin with a smaller margin.
Cut Sheet Feeder Control
Decimal Hex. ASCII
Compj
Sheet feed option 27 91 70 n1 1BSB46nl
n2m1 m2m3 n2m1 m2m3
Description of Parameters
n 1 n2:
m1:
m2:
m3:
number of parameters
paper feeding technique
type of media
bin number
ESC[Fnl r
I
n2m1 m2m3
n 1 and n2 are the number of bytes in the sequence. Normally this
will
be three, so n1=3 and n2=0; ml defines paper feeding method ,
m2 is a constant
set at 1 and m3 defines the Bin number.
m1=1
m1=3
m2=1
m3=0
m3=1
m3=2
set manually inserting mode
set CSF inserting mode
constant
no change
Bin 1
Bin 2
For example, to specify cut sheet feeding from Bin 2:
LPRINTCHR$(27) ;CHR$(91) ;CHR$(70) ;CHR$(3);CHR$(0);
CHR$(3) ;CHR$(1) ;CHR$(2);
3- 30 IBM Modes Sta11dard Feat11res