Operation Manual

Operating instructions > 46
Rear Feed
(Push)
cont.
Continuous Paper
Top o f Form
Select an adjustment
value for the reference
position in regard to the
Top of Form of a
continuous form.
2.12 mm (1/12”)
4.23 mm (2/12”)
6.35 mm (3/12”)
8.47 mm (4/12”)
10.58 mm (5/12”)
12.70 mm (6/12”)
14.82 mm (7/12”)
16.93 mm (8/12”)
19.05 mm (9/12”)
21.17 mm (10/12”)
23.28 mm (11/12”)
25.40 mm (12/12”)
27.52 mm (13/12”)
User Top of Form
LF Revise Adjust the line feed
amount.
-2
-1
0
+1
+2
Centering Position Select to limit printhead
travel when printing
narrow columns.
Select Mode1 for
ML5720 and ML5790.
Select Mode 1 or Mode 2
for ML5721.
Default
Mode1
Mode2
Front
Feed
(Push)
Line Spacing Select line feed pitch. 6 LPI
8LPI
Form Tear-Off When printer is idle (0.5,
1.0 or 2.0 sec), paper is
advanced from the
current print position to
the tear position. When
data is received, paper is
moved to its original
printing position.
Manual
0.5 sec
1.0 sec
2.0 sec
Skip Over
Perforation
Select whether to skip
over perforation or not.
(When a skip over
perforation command is
received, the received
command is given
priority.)
No
25.4 mm (1”)
Page Width
(Displayed only for
ML5721 and
ML5791)
Change to 8” to print on
narrow paper.
345.44 mm (13.6”)
203.2 mm (8”)
GROUP ITEM FUNCTION SETS
ML5720/ML5721 ML5790/ML5791