Operation Manual

List of the Device Setting Menu Items
- 102 -
*1 A message appears confirming you that making changes automatically restarts the system.
Select [Yes] to continue. Select [No] to cancel.
*2 A message appears confirming you that execution automatically restarts the system. Select
[Yes] to continue. Select [No] to cancel.
*3 A message appears confirming you that execution deleted all job logs. Select [Yes] to con-
tinue. Select [No] to cancel.
 User Install
Admin Password aaaaaa Changes an administrator password. 6 to
12 characters are available.
Reset Settings
*2
Execute Deletes job macros, fax send/receive
data, and the history information and
returns the settings to the default.
Job Log
Setup
Save Job Log
*1
Disable Sets whether to save job logs.
Clear Job Log*3 Execute Clears the saved job logs. Display condi-
tion:[Save Job Log] is set to [Enable].
Print
Statistics
Supplies Report Disable Sets whether to print the consumable
counters' report.
Reset Main
Counter
Execute Resets the main counter.
Reset Supplies
Counter
Execute Resets the consumable counter.
Display conditions: Setting [Consumable
Counter] to [Active].
Item
Factory
Default
Description
Time Zone 0:00 Sets your time zone in relation to GMT.
Available range: -12:00 to + 13:00. (15
minutes / increment)
Set Daylight Saving ON Sets whether to enable the Daylight
Saving mode.
Time
Setup
Auto Setup SNTP Server (Primary) Manual Setup Sets the SNTP server to use for setting the
current date and time. Maximum 64
characters.
SNTP Server (Secondary)
Manual Setup Sets the current date and time manually.
Power
Save
Power Save Enable ON Sets whether to enable the power save
mode.
Sleep ON Sets whether to enable the sleep mode.
Auto Power Off Auto Config
or Disable
Sets the behavior of automatic power off.
High Humid Mode OFF Sets whether to enable the humidity
mode.
MF(Tone)/DP(Pulse) Tone Selects a dialing method.
Reception Mode Fax Ready
Mode
Sets the reception mode.
DRD Type Type1 Sets the DRD Type.
Dial Tone Detection OFF Sets whether to detect a dial tone.
Busy Tone Detection OFF Sets whether to detect a busy tone.
Monitor Control OFF Select any one from three choices: Not
to monitor. Monitor till receiving/transmit-
ting the first valid facsimile signal. Execute
monitoring during communication.
Monitor Volume Middle Sets the Monitor Volume.
Item
Factory
Default
Description