Operation Manual

Network Setting Items
- 147 -
Network Settings
8
 IP Filtering
Web (Port
Number:
80)
WEB
(Default
Port 80)
Device
Settings
(Web) -
Enable
Printer
Settings
(Web)
Web Page
Settings
Enable Specifies whether to use the web page
to access the machine.
Web Web (IPP) - - - 80 Specifies the port number to access the
web page of the machine.
IPP (Port
Number:
631)
IPP (Default
Port 631)
- - - Disable Specifies whether to use IPP.
Telnet Telnet - - - Disable Specifies whether to use TELNET to
access the machine.
FTP FTP - - - Disable Specifies whether to use FTP to access
the machine.
SNMP SNMP - - - Enable Specifies whether to use SNMP to access
the machine.
POP POP3
(E-Mail)
- - - Disable Specifies whether to use POP3.
POP POP - - - 110 Specifies the port number for POP3.
SNTP SNTP - - - Disable Specifies whether to use SNTP.
Local Ports Local Ports - - - Enable Specifies whether to use a unique
protocol.
-SMTP
(E-Mail)
- - - Enable Specifies whether to use SMTP send.
SMTP Send SMTP Send - - - 25 Specifies the port number for SMTP
send.
SMTP
Receive
SMTP
Receive
- - - 25 Specifies the port number for SMTP
receive.
Change
Network
Password
Password Password
Change
Password
Change
Change
Password
(last six digits
of MAC
address)
Sets a new administrator password up to
15 characters. The password is case-
sensitive. This password is used only
when you change settings from the
utilities. The administrator password set
in the machine cannot be changed from
this item.
Item
Factory
Default
Setting
Description
Web
page
TELNET
Configurati
on Tool/
Network
Setting
Plug-in
Network Card Setup
(Windows) (Mac OS X)
IP Filtering IP Filtering - - - Disable Specifies whether to use IP filtering.
Be sure to configure the following
settings of this category when you
enable IP filtering. If you do not, you
cannot access the machine via TCP/
IP.
Item
Factory
Default
Setting
Description
Web
page
TELNET
Configurati
on Tool/
Network
Setting
Plug-in
Network Card Setup
(Windows) (Mac OS X)