Operation Manual

List of the Device Setting Menu Items
-84-
Admin Setup
In the following menu, you can change the settings that need the administrator authority.
Memo
 To enter the [Admin Setup] menu, you will need an administrator password. The default password is "aaaaaa".
 If you change the default setting from the [Admin Setup] menu, and want to reflect the changed default on the start screen
immediately, press <RESET/LOG OUT> key or press the function switch key which is any of <Copy>, <Scan>, <Print> and
<FAX/HOOK>.
 Copy Setup
 "Copy Setup"  "Fax Setup"  "Internet Fax Setup"
 "Scanner Setup"  "Print From USB Memory Setup"  "Print Setup"
 "Network Menu"  "Management"  "User Install"
Item
Factory
Default
Description
Default
Settings
Scan Size A4 or Letter Sets the default scan size.
Duplex Copy OFF (Do not
do both sides)
Sets the duplex (2-sided) function off or
on.
Zoom 100% Sets the default zoom ratio.
Sort ON Sets whether to collate copied documents
by default.
Image Settings Density 0 Sets the default density of images.
Document Type Text/Photo Sets the default print quality when scan-
ning documents.
Resolution Normal Sets the default setting of resolution.
Background Removal 3
Sets the default setup of the background removal.
Contrast 0 Sets the default setting of contrast.
Direction Portrait Selects the default page orientation of
documents.
ID Card Copy OFF Sets whether to use the ID card copy
mode by default.
Continuous Scan OFF
Sets whether to use the continuous scan mode.
Mixed Size OFF Sets whether different sized documents
are copied on each size paper as the
default.
Margin Margin OFF Sets the default settings of margins.
Margin Front Left 0 Available rage: 0 to ± 25 mm
(0.0 to 1.0inches) (1 mm/ increment)
Top
Back Left
Top
Edge Erase Setting ON Sets whether to erase the shade created
in the surrounding of 2-page spread docu-
ments as the default.
Width 2 mm
(0.1 inch)
Sets an erasing width.
Available range:2 to 50 mm
(0.1 to 2.0 inches).