Operation Manual

Operator Panel
-26-
Default Screen
Turn the power on, and when the machine is
ready for use, the Copy Start screen will be
displayed as the default mode.
You can switch to other functions by using the
main function keys.
Reference
 You can change the default screen by pressing the
<SETTING> key on the operator panel and then selecting
[Admin Setup] > [Management] > [Default Mode].
For details, refer to the User's Manual Advanced.
11 <UP> key Shifts the highlighted selection up while an item is selected or
characters are entered.
12 <DOWN> key Shifts the highlighted selection down while an item is selected or
characters are entered.
13 <LEFT> key  Returns to the previous screen.
 Shifts the highlighted selection to the left while an item is
selected or characters are entered.
14 <RIGHT> key  Proceeds to the next screen.
 Shifts the highlighted selection to the right while an item is
selected or characters are entered.
15 <OK> key  Confirms the highlighted item.
 Selects an item to be checked.
16 <BACK> key Returns to the previous screen.
17 <CLEAR> key Executes the following action
 Minimizes a setting value.
 Enters zero for a setting value.
 Clears what is entered.
 Cancels a selected item.
18 <POWER SAVE> key  Enters or exits the power saving mode.
 Exits the sleep mode.
Lights up in green while in the modes.
19 <DATA IN MEMORY> indicator
(for MB451/MB451w/MB471/
MB471w/MB491/MB491+/
MB491+LP/ES4191 MFP/
MPS4200mb/MPS4700mb)
Lights up when data is in memory.
* Sleep mode does not light up even if there is data in the memory.
20 One-Touch key pad Accesses a registered e-mail address or fax number.
8 keys x 2 groups which is 16 entries in total (Press the <SHIFT>
key to switch the groups)
21 <JOB MACRO> key
(for MB471/MB471w/MB491/
MB491+/MB491+LP/ES4191 MFP/
MPS4200mb/MPS4700mb)
Switches to the job macro screen.
22 Qwerty keyboard
(for MB471/MB471w/MB491/
MB491+/MB491+LP/ES4191 MFP/
MPS4200mb/MPS4700mb)
Enters text.
It is under the one-touch key pad.
No. Name Function