Operation Manual

ManualsBrandsOki ManualsPrinterMPS4700

Connecting to a Computer

-49-

Setup

Memo

 If [Timeout] is displayed, it is possible that the

wireless AP of the connection destination could not be

found within the time limit. After entering the PIN

code from this equipment into the wireless AP and

starting WPS-PIN, select [Yes] in step 7 again within 2

minutes.



Configuring wireless network selection

1 Log in as the administrator.

2 Press the to select [Network Menu],

and then press the .

3 Press the to select [Network Setup],

and then press the .

4 Press the to select [Wireless

Setting], and then press the .

5 Press the to select [Wireless

Network Selection], and then press

the .

6 The product starts to search the wireless

access point.

7 A list of access points found by the

search will be displayed. Select the

access point you wish to connect to using

the keys, then press .

8 Enter the security password of the

selected access point.

(1) With WEP

a) [Enter the WEP key] will be displayed.

Enter the encryption key using the

keys, and press .

Go to Section 9

(2) With WPA-PSK or WPA2-PSK

a) [Enter the Pre-shared key] will be

displayed. Enter the encryption key using

the

keys, and press .

Go to Section 9

(3) With WPA-EAP or WPA2-EAP

a) Configure settings from Web Page.

(4) With Disable

a) The password input screen will not be

displayed. Go to Section 9.

9 In the confirmation screen, please check

the contents on the confirmation screen,

select [Yes], and press .