Operation Manual

Connecting to a Computer
-50-
10 Connection successful will be displayed
once you have successfully connected to
the wireless LAN.
Memo
 If unable to connect to a wireless LAN, [Connection
failed] will be displayed and you will be returned to
the Wireless Settings screen in Section 5.
 Configuring manually
1
Log in as the administrator.
2 Press the to select [Network Menu],
and then press the .
3 Press the to select [Network Setup],
and then press the .
4 Press the to select [Wireless
Setting], and then press the .
5 Press the to select [Wireless
Network Selection], and then press
the .
6 The product starts to search the wireless
access point.
7 A list of access points found by the
search will be displayed. With the key,
select [Manual Setup], which will be
displayed at the very bottom.
8 Press the to select [SSID], and then
press the .
Memo
 When the [OK] button is pressed, the screen switches
to the security settings screen in step 5 without
switching to the screen in step 6. If the SSID is not
set, a warning screen is displayed.
9 Enter the SSID name (within 1-32
characters) of the wireless AP that you
want to connect to.
After entering the SSID, move the cursor
to the [Done] field and press .
10 In the security settings screen, select the
same security setting as the wireless AP
that you want to connect to.
Memo
 The default is [Disable].
 Depending on the model of wireless AP, mixed WPA-
PSK/WPA2-PSK may be supported. In this case, we
recommend using WPA2-PSK.
Note
 Security settings (WPA-EAP/WPA2-EAP) using an
authentication server are also supported, but this can
only be set from the Web. For details, see the
Advanced section of the User Manual.
OK
OK