Operation Manual

ManualsBrandsOki ManualsPrinterMPS4700

Connecting to a Computer

-52-

Memo



If [

Timeout

] is displayed, the connection destination wireless

AP may not have been found within the specified time. Check

the SSID, security settings, and KEY settings, and retry.

 Reconnect to the wireless LAN

When the wireless is enabled, restart the wireless

function. If a problem has occurred in the wireless

AP communication or performance, the wireless

function can be restarted.

(If the wired is enabled, the wireless function is

enabled with the configured wireless settings.)

1 Log in as the administrator.

2 Press the to select [Network Menu],

and then press the .

3 Press the to select [Network Setup],

and then press the .

4 Press the to select [Wireless

Setting], and then press the .

5 Press the to select [Wireless

Network Selection], and then press .

6 Press the to select [Yes], and then

press .

7 When [Yes] is selected in step 6,

[Searching for connection...] is

displayed in the screen.

After this, [Connection successful] is

displayed, and the wireless LAN can be

used on this equipment.

Memo

 If [A Timeout occurred.] is displayed, the connection

destination wireless AP may not have been found within

the required time. The SSID, security settings, and KEY

need to be configured to match the wireless AP settings.

Check each of the settings. For details on each of the

setting items, see "Using the wireless LAN".

 Switching from wireless to wired

The network connection can be switched from

wireless to wired.

1 Log in as the administrator.

2 Press the to select [Network Menu],

and then press the .

3 Press the to select [Network Setup],

and then press the .

4 Press the to select [Enabling Wired

Communications], and then press .

5 Press the to select [Yes], and then

press .