Extra Information

- 113 -
Network Setting Items
4
4. Network Settings
 General Network Settings
Shaded text indicates the factory default setting.
Item
Setting Description
Web browser
Conguration
Tool
(Network
Setting Plug-in)
Network
Card
Setup
(Mac)
Gigabit network - - ENABLE Specify the support for a
gigabit network.
When enabled, high-speed
connection with 1000Base-T
Full/Half is supported, but the
printer does not enter the sleep
mode if operated in such an
environment.
DISABLE
HUB Link Setting - - AUTO NEGOTIATION Specify the communication
speed and communication
method between the printer
and a hub. Normally, set to
[AUTO NEGOTIATION].
100BASE-TX FULL
100BASE-TX HALF
10BASE-T FULL
10BASE-T HALF
TCP ACK
- - Type1 Select the type of TCP
Acknowledgement.
When [Type1] is selected, the
printer returns the response for
each packet.
When [Type2] is selected, the
printer returns the response for
multiple packets at a time.
Selecting [Type2] may
improve the printing time in
case the printing time has
become longer due to the
setting of the hub. Normally,
select [Type1].
Type2
 Security
Shaded text indicates the factory default setting.
Item
Setting Description
Web browser
Conguration
Tool
(Network
Setting Plug-in)
Network
Card Setup
(Mac)
FTP - - ENABLE Set whether to access the
printer using FTP.
DISABLE
Telnet - - ENABLE Set whether to access the
printer using the telnet
protocol.
DISABLE
Web (Port No.: 80) Device
Settings(Web)
Web Page
Settings
ENABLE Set whether to access the
printer through a web browser.
DISABLE
Web - - 1 Specify a port number to
access the web page for the
printer.
-
80
-
65535
IPP (Port No.: 631) - - ENABLE Set whether to use the IPP
protocol.
DISABLE