Extra Information

- 115 -
Network Setting Items
4
4. Network Settings
Shaded text indicates the factory default setting.
Item
Setting Description
Web browser
Conguration
Tool
(Network
Setting Plug-in)
Network
Card Setup
(Mac)
Start Address 1-10 - - 0.0.0.0 Specify the IP addresses
that are allowed to access
the printer. You can specify
an individual address or an
address range. Specify the
start address and end address
when setting the address
range. Entering “0.0.0.0”
disables the setting.
End Address 1-10 - - 0.0.0.0
Printing 1-10 - - ENABLE Set whether to allow to
changes to the conguration
from the IP addresses specied
in IP Address Range #1-10.
DISABLE
Conguration 1-10 - - ENABLE Set whether to allow to
change conguration from the
IP addresses specied in IP
Address Range #1-10.
DISABLE
Administrator’s IP Address to
Register
- - 0.0.0.0 Set the IP address of the
administrator. Only this
address can always access the
printer. Remember that when
the administrator accesses the
printer via a proxy server, this
item is set to the address of
the proxy server and all access
via the proxy server is allowed.
It is recommended that the
administrator accesses the
printer without using a proxy
server.
MAC Address Filtering
Shaded text indicates the factory default setting.
Item
Setting Description
Web browser
Conguration
Tool
(Network
Setting Plug-in)
Network
Card
Setup
(Mac)
MAC Address Filtering - - ENABLE Set whether to use MAC address
ltering, the function to allow
access only from MAC addresses
specied. This function requires
thorough knowledge of MAC
addresses. Normally, select
[DISABLE]. Set the items
below properly when selecting
[ENABLE]; otherwise, no access
is allowed from the network.
DISABLE
MAC Address Access - - ACCEPT Set whether to allow or deny
access from the MAC addresses
specied in MAC Address #1-50.
DENY
MAC Address #1-50 - - 00:00:00:
00:00:00
Specify the MAC addresses that
are allowed to access the printer.
Entering “00:00:00:00:00:00”
disables the setting.