Extra Information

- 120 -
Network Setting Items
4
4. Network Settings
 IPSec
Shaded text indicates the factory default setting.
Item
Setting Description
Web browser
Conguration
Tool
(Network
Setting Plug-in)
Network
Card Setup
(Mac)
IPSec - - ENABLE Set whether to use IPSec.
DISABLE
IP Address 1-50 - - 0.0.0.0 Specify the host address allowed to
communicate by IPSec.
● Use one-byte characters
separated by a dot for an IPv4
address.
● Use one-byte alphanumeric
characters separated by a colon
for an IPv6 global address.
● IPv6 link-local address is not
supported.
IKE Encryption Algorithm - - 3DES-CBC Set the IKE encryption method.
DES-CBC
IKE Hash Algorithm - - SHA-1 Set the IKE hash method.
MD5
Dife-Hellman Group - - Group1 Set the Dife-Hellman group used in
Phase1 Proposal.
Group2
LifeTime - - 600 Set the lifetime of ISAKMP SA.
Normally, use the factory default
setting.
86400
28800
Pre-shared Key - - (NULL) Set the pre-shared key.
Key PFS - - KEYPFS Set whether to use Key PFS (Perfect
Forward Secrecy).
NOPFS
Dife-Hellman Group when Key
PFS Enable
- - Group2 Set the Dife-Hellman group used
for Key PFS.
Group1
None
ESP - - Enable Set whether to use ESP
(Encapsulating Security Payload).
Disable
ESP Encryption Algorithm - - 3DES-CBC Set the encryption algorithm for ESP.
DES-CBC
ESP Authentication Algorithm - - SHA-1 Set the authentication algorithm for
ESP.
MD5
OFF
AH - - Enable Set whether to use AH
(Authentication Header).
Disable
AH Authentication Algorithm - - SHA-1 Set the encryption algorithm for AH.
MD5
LifeTime - - 600 Set the lifetime of IPSec SA.
Normally, use the factory default
setting.
3600
86400