Extra Information

- 131 -
Changing Network Settings From the Web Page
4
4. Network Settings
3 Select [Network Setup]>
[IEEE802.1X].
4 Select [Enable] for [IEEE802.1X].
5 Select [EAP-TLS] for [EAP Type].
6 Enter a user name in [EAP User].
7 Select [Not use SSL/TLS Certicate
for EAP authentication] and then click
[Import].
8 Enter the le name of the certicate.
Only a PKCS#12 le can be imported.
9 Enter the password of the certicate and
then click [OK].
10 Select [Authenticate Server] and then
click [Import].
11 Enter the le name of the CA certicate
and then click [OK].
Specify a certicate issued by the certicate
authority from which the RADIUS server obtained
a certicate. A PEM, DER, and PKCS#7 le can be
imported.
12 Click [Submit].
The network card reboots to enable the new
settings.
13 When the standby screen appears on the
printer, turn off the printer.
14 Go to “Connecting Your Printer to an
Authentication Switch” P.131.
Connecting Your Printer to an
Authentication Switch
1 Make sure that the printer is turned off.
2 Connect an Ethernet cable to the
network interface port.
3 Connect the Ethernet cable to the
authentication port of an authentication
switch.
4 Turn on the printer.
5 Set up the printer.
Reference
● For details on the initial setup, refer to the User's
Manual (Setup).
Conguring the wireless LAN from
the web page (Wireless Model Only)
This section explains how to set the wireless LAN
settings change the network settings from the
printer’s web page.
To access the printer’s web page, your computer
must meet the following conditions:
● TCP/IP is enabled.
● Microsoft Internet Explorer 6.0 or later, Safari
3.0 or later, or Firefox 3.0 or later is installed.
Memo
● Ensure that the security setting of the web browser is set
to a middle level, or that cookies are allowed.
● To enter the [Admin Setup] menu, it is necessary to log
in as the administrator. The factory default administrator
password is “aaaaaa”.
Reference
● Some of the following settings can be performed on other
utilities. For details, refer to “Network Setting Items”
P.102.
In order to congure from the Web, it is
necessary to have completed the settings for
wired or wireless network connection.
Note
● If WPA-EAP or WPA2-EAP is set for the security method,
the settings from the [IEEE802.1x] menu need to be set
beforehand.
 IEEE802.1X settings
1 Access the printer’s web page and log in
as the administrator.
The user name is “root”, and the default
password is “aaaaaa”.
2 Click the [IEEE802.1X] tab.
Using EAP-TLS:
a Select [Disable] for [IEEE802.1X].
b Select [EAP-TLS] for the [EAP
Type].
c Enter a user name in [EAP User].
d Select [Do not use SSL/
TLS Certicate for EAP
authentication] and then click
[Import].
e Enter the le name of the certicate.
Only a PKCS#12 le can be
imported.
f Enter the password of the certicate
and then click [OK].