Extra Information

- 39 -
Printing with Various Functions
1
1. Convenient Print Functions
14 Start printing on the print dialog.
Reference
● "Conguration Tool" P.91.
Storing Print Data
You can store print data on the memory or
hard disk installed on the printer and print it as
needed from the operator panel by entering a
password.
Note
● If the spooled data cannot be stored in the memory or
hard disk because of a memory shortage, a message
indicating that the data is invalid appears.
● This function is not available with the Windows XPS
printer driver and the Mac OS X PS printer driver.
For Windows PCL Printer Driver
1 Open the le you want to print.
2 From the [File] menu, select [Print].
3 Click [Preferences].
4 Select the [Job Options] tab.
5 Check [Store for Re-print].
6 Enter a job name in the [Job Name]
box and a password in the [Personal ID
Number(PIN)] box.
If you check the [Request Job Name for each
print job] box, a prompt for the job name
appears when you send the job to the printer.
7 Click [OK].
8 Congure other settings if necessary and
then start printing.
The print job is sent to the printer, but is not
printed.
9 Press the <Fn> key.
10 Enter <2> using the ten-key pad and
press the <ENTER> button.
11 Enter the password you set in step 6
in the [Password] box and then press
the <ENTER> button to start a job
searching.
- Press the <CLEAR> key if you enter a
wrong number.
- Press the <CANCEL> button if you want
to stop the job search.
12 Make sure that [Print] is selected and
then press the <ENTER> button.
If you select [Delete], you can delete the print
job.