Extra Information

- 98 -
Windows Utilities
3
3. Using Utility Software
Automatically Conguring the IP
Address
You can set it to ensure that the connection with
the original printer is maintained even if the
printer’s IP address is changed.
Memo
● The IP address may change if DHCP is being used
to dynamically assign IP addresses or the network
administrator manually changes the printer’s IP address.
Note
● Administrator privileges are required.
1 Launch the OKI LPR utility.
2 Select [Setup] from the [Option]
menu.
3 Select the [Auto Reconnect] checkbox
and click on [OK].
Uninstalling the OKI LPR Utility
Note
● Administrator privileges are required.
1 Conrm that the OKI LPR utility is
closed.
2 Click on [Start], and then select [All
Programs]>[Okidata]>[OKI LPR
Utility]>
[Uninstall OKI LPR Utility].
If the [User Account Control] dialog box
appears, click [Yes].
3 On the conrmation screen, click on
[Yes].
Network Extension
In Network Extension, you can check the
settings on the printer and set the composition
of the options.
In order to use Network Extension, TCP/IP must
be activated.
Note
● Administrator privileges are required.
Memo
● Network Extension is automatically installed when
installing a printer driver through a TCP/IP network.
● Network Extension is operated in conjunction with the
printer driver. You cannot opt to only have Network
Extension installed.
● Network Extension only functions when the printer driver
is connected to OKI LPR port or the standard TCP/IP port.
Launching the Utility
To use Network Extension, open the printer
properties screen.
1 Click on [Start] and then select
[Devices and Printers].
2 Right click on the printer icon and select
[Printer properties].
Checking Printer Settings
You can check the settings of the printer.
Memo
● If you use Network Extension in an environment that is
not supported, the [Option] tab may not be displayed.
1 Open the printer properties screen.
2 Select the [Option] tab.
3 Click [Update].