Operation Manual

HOW TO MAKE COPIES
- 36 -
1
2
3
4
5
6
Bypass copying on standard size paper
 Copying on A4, A5 and B5 size paper
(in equipment other than for North
America) / Letter and Legal size paper
(in equipment for North America)
1
Place the original(s).
2
Place the paper with its copy side face up
on the multi-purpose tray.
Note
• The height of the paper must not exceed the indicator
on the side guides.
• When you use more than one sheet of paper, fan the
sheets well before placing them on the multi-purpose
tray. Be careful not to cut your fingers when fanning.
• Do not push paper into the entrance of the multi-
purpose tray (MPT). This could cause a paper misfeed.
3
Open the paper set cover, then Align the
manual feeding paper guides to the paper
length, and close the paper set cover.
"Zoom" screen is automatically displayed.
4
Select the same size button under “COPY”
as that of the paper you placed on the multi-
purpose tray.
The paper size is now set.
5
Press [PAPER TYPE] on the touch panel if
the paper type of the paper you placed on
the multi-purpose tray is other than plain
paper.
1
2