Printer Developer's Guide
Table Of Contents
- Contents
- 1. Setting Up the Printer
- 1.1. Select a Location
- 1.2 Where to install your printer
- 1.3 Unpacking
- 1.4 Installing the Printer
- 1.5 Installing the Paper
- 2. Using the Printer
- 3. Maintenance
- 4. Troubleshooting and Repair
- 5. Specifications
- 5.1 Introduction
- 5.2 General Specifications
- 5.3 Communication Interface Specifications
- 5.4 Physical Characteristics
- 5.5 Logical Characteristics
- 5.6 Printer Performance
- 5.7 Media Specifications
- 5.8 Paper Feed Specifications
- 5.9 MICR Specifications (Only with MICR type)
- 5.10 Auto Cutter Specifications
- 5.11 Ribbon Specifications
- 5.12 Reliability
- 6. Command Description
- 7. Using the Unitool Printer Driver
- 1. Setting Up the Printer
Document Title and Part Number
OKIPOS 425D Developer’s Guide
P/N 59336301
Disclaimer
Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki Data
assumes no responsibility for the results of errors or omissions beyond its control. Oki Data also cannot guarantee that changes
in software and equipment made by other manufacturers and referred to in this document will not affect the applicability of the
information in it. Mention of software products manufactured by other companies does not necessarily constitute endorsement
by Oki Data.
Copyright Information
Copyright 2001 by Oki Data. All Rights Reserved
First Edition: August, 2001
Written and produced by the Oki Data Training and Publications Department.
Contact Information
Please address any comments on this publication to:
Mailing Address
Oki Data Americas
Training and Publications Department
2000 Bishops Gate Boulevard
Mount Laurel, NJ 08054-4620
e-Mail Address
pubs@okidata.com
Web Site
Please visit Oki Data’s multilingual web site at:
http://www.okidata.com