Printer Developer's Guide
Table Of Contents
- Contents
- 1. Setting Up the Printer
- 1.1. Select a Location
- 1.2 Where to install your printer
- 1.3 Unpacking
- 1.4 Installing the Printer
- 1.5 Installing the Paper
- 2. Using the Printer
- 3. Maintenance
- 4. Troubleshooting and Repair
- 5. Specifications
- 5.1 Introduction
- 5.2 General Specifications
- 5.3 Communication Interface Specifications
- 5.4 Physical Characteristics
- 5.5 Logical Characteristics
- 5.6 Printer Performance
- 5.7 Media Specifications
- 5.8 Paper Feed Specifications
- 5.9 MICR Specifications (Only with MICR type)
- 5.10 Auto Cutter Specifications
- 5.11 Ribbon Specifications
- 5.12 Reliability
- 6. Command Description
- 7. Using the Unitool Printer Driver
- 1. Setting Up the Printer
64
OKIPOS 425D
|
5.2 General Specifications
5.2.1 Power Requirements
1 Input power
Single-phase AC
Voltage: Universal 120VAC+15% – 230VAC+15%
Frequency: 50/60Hz +2%
2 Power consumption (without Fiscal Control PCB)
Local Test : Max. 40W (Local Printing)
Idle: Max. 15W (Energy Star compliant)
5.2.2 Environmental Conditions
1 Ambient temperature and relative humidity
Operating Non-operating Unit
Temperature 41 to 104 32 to 109.4 °F
(5 to 40) (0 to 43) (°C)
Relative 20 to 80 10 to 90 %RH
Humidity
Avoid condensation at all times.
5.2.3 Agency Approvals
UL: UL 1950
CSA: CSA C22.2 N0.950
CE: EN 50081-1: 1992 (EN55022 class B)
EN 50082-1: 1992
EN 60950
FCC: class A