Pro8432WT
About This Manual Terms in this document The following terms are used in this manual. Note ●● Indicates important information on operations. Make sure to read sections with this mark. Memo ●● Indicates additional information on operations. You should read sections with this mark. Reference ●● Indicates where to look when you want to know more detailed or related information. WARNING ●● A warning provides additional information which, if ignored, may result in a risk of personal injury.
Notation used in this manual The following notations may be used in this manual. ●● PostScript3 Emulation → PSE, POSTSCRIPT3 Emulation, POSTSCRIPT3 EMULATION ●● Microsoft® Windows® 10 64-bit Edition operating system → Windows 10 (64bit version) * ●● Microsoft® Windows® 8.1 64-bit Edition operating system → Windows 8.
Contents About This Manual....................................................................................2 Terms in this document.............................................................................................. 2 Symbols in this document........................................................................................... 2 Notation used in this manual....................................................................................... 3 1. Convenient Print Functions...............
Contents 3. Changing Printer Settings................................................... 30 Checking the Current Settings................................................................. 30 Printing Out Print Information.................................................................................... 30 Changing the Equipment Settings............................................................. 31 Admin Setup...............................................................................................
Contents Deleting or Updating the Printer Drivers.................................................... 76 Deleting a Printer Driver........................................................................................... 76 Updating a Printer Driver.......................................................................................... 77 Index.......................................................................................
1. Convenient Print Functions 1 Description of Print Functions [Job Options] tab For Windows PS Printer Driver [Layout] tab Item Orientation Page Order Page Format Preview Advanced Item Description Selects the document orientation. Selects the page order of document. Sets the number of pages to be printed on one sheet of paper. Display print image. Sets the advanced settings. Description Quality Controls the print resolution.
1 For OS X PS Printer Driver [Color Matching] panel [TextEdit] panel 1. Convenient Print Functions Item Item Description Printing header and footer Enable to print page numbers, dates, and text titles, etc. Rewrap contents to fit page Enable to print by aligning to the text wrapping method durign editing. Description ColorSync Specifies the ColorSync function. In printer Implements printer color matching. Profile Specifies the profile.
[Paper Feed] panel [Color] panel 1 Item Description All Pages From Specifies the tray for the paper feed. The tray is selected automatically when [Auto Select] is specified. First Page From Select to print from the tray that specifies the header page. Remaining From Prints from the tray that specifies the remaining pages. Item Description Gray Scale (White) Prints the data created as Print grayscale in the application with the white toner only.
1 Printing on Labels Memo 1. Convenient Print Functions ●● This section uses [MemoPad] for its Windows explanations, and [TextEditor] for its OS X explanations. Descriptions may differ depending on the applications and printer drivers used. ●● If setting details are not displayed in the print dialog box for OS X, click [Show Details] at the bottom of the dialog box. Reference ●● For detailed explanations of the printer driver setup items, see the printer driver "Online Help".
For Windows PS Printer Driver Printing on Custom Size Paper From the [File] menu, select [Print]. 2 Click [Preferences] or [Properties]. You can register a customized paper size on the printer driver so you can print on nonstandard paper such as banners. 3 Select [Paper/Quality] tab. ●● Settable custom size range 4 Select [Multi-Purpose Tray] from [Paper Source]. Width: 64 to 297 mm Length: 90 to 431 mm Paper sizes that can be fed differ depending on the tray. 5 Click [Advanced].
1 1. Convenient Print Functions 1 Press the scroll button operator panel. 2 Press the scroll button several times to select [Menus] and press the button. 3 or Check that [Tray Configuration] is selected and press the button. 4 Press the scroll button several times to select [Tray Config] of the paper tray in which you loaded paper and then press the button. 5 Check that [Paper Size] is selected and press the button. 6 Press the button.
For OS X PS Printer Driver Manual Printing Note 1 Open the file you want to print. 2 From the [File] menu, select [Page Setup]. 3 Select [Manage Custom Sizes] from [Paper Size]. 4 Click [+] to add an item to the list of custom paper sizes. 5 You can print a document feeding paper manually on the MP tray. The printer prints on a sheet of paper at a time. Every time a page is printed, the message “Install Paper MPTray %MEDIA_SIZE% Press ONLINE Button” appears.
1 For OS X PS Printer Driver Combining Multiple Pages Onto One Sheet of Paper (Multiple page printing) 1. Convenient Print Functions 1 From the [File] menu, select [Print]. 2 Select [Paper Feed] from the panel menu. 3 Select [All pages From] and then select [Multi-Purpose Tray]. 4 Select [Print Options] from the panel menu. You can print multiple pages of a document onto a single side of a sheet of paper. 1 2 3 4 5 Click the [Feed] button from [Print Options].
For OS X PS Printer Driver Open the file you want to print. 2 From the [File] menu, select [Print]. 3 Select [Layout] from the panel menu. 4 Select the number of pages to print on each sheet from [Pages per Sheet]. 5 Specify the settings for [Border] and [Layout Direction]. 6 You can print data formatted for one size page onto a different size page without modifying the print data. A3 A4 Note Configure other settings if necessary and then start printing.
1 Collating Pages Setting the Page Order 1. Convenient Print Functions You can print copies of multiple sets of a multipage document. You can set whether pages are printed in forward or reverse order to suit your needs. If using a face down stacker, set the printing to run in forward order to stack the paper in the order of the pages. Note ●● This function may not be available in some applications.
Cover Printing Changing Print Quality (Resolution) You can change the print quality to suit your needs. For Windows PS Printer Driver For OS X PS Printer Driver 1 Open the file you want to print. 1 Open the file you want to print. 2 From the [File] menu, select [Print]. 2 From the [File] menu, select [Print]. 3 Click [Preferences] or [Properties]. 3 Select [Paper Feed] from the panel menu. 4 Select the [Job Options] tab.
1 Printing with white toner only Color printing with white toner 1. Convenient Print Functions You can print with the white toner only without using the cyan, magenta, and yellow toner. You can specify whether to use the white toner for color printing. For Windows PS Printer Driver For Windows PS Printer Driver 1 Open the file you want to print. 1 Open the file you want to print. 2 Select [Print] from the [File] menu. 2 Select [Print] from the [File] menu.
How to print with application setting The following pages explain how to configure the setting in the Adobe applications. Click the arrow of [Paths] and perform the [Clipping Path] menu. Click [OK] to select [Path 1] as [Clipping Path]. 8 Save the image data by Photoshop format (PSD). 9 Select the [Print with Preview] menu. 10 Select the [No Color Management] in [Color Handling] options then click [Print] to print the image data.
1 Emphasizing Fine Lines Auto Tray Selection 1. Convenient Print Functions You can print fine lines and small characters clearer. You can set in the printer driver to automatically switch paper feed trays with the same size of paper loaded. Memo First, set on the operator panel for the MP tray to be available for auto selection. Then, set the auto selection of the tray with the printer driver. ●● This function is turned on by default.
For OS X PS Printer Driver Open the file you want to print. 2 From the [File] menu, select [Print]. 3 Select [Paper Feed] from the panel menu. 4 5 You can switch paper feed trays automatically. When a tray runs out of paper while printing, the printer locates another tray with the same size of paper on the printer driver and begins feeding paper from that tray. This function is effective for large print jobs of the same paper size. Select [All pages From] and select [Auto Select].
1 7 Configure other settings if necessary and then start printing. 1. Convenient Print Functions For OS X PS Printer Driver Changing the Driver's Default Settings You can use as the printer driver’s default settings print settings that you often use. 1 Open the file you want to print. 2 From the [File] menu, select [Print]. 3 Select [Print Options] from the panel menu. 1 Click [Start] and select [Devices and Printers]. 4 Click the [Feed] button from [Print Options].
Using Printer Fonts Using Computer Fonts You can print your documents using TrueType fonts in the computer to retain the same font appearance as on the computer screen. Note Note ●● The printer fonts do not exactly duplicate the appearance of the TrueType fonts seen on screen. ●● This function is not available with the OS X PS printer driver. ●● This function is not available with the OS X PS printer driver.
1 Using a Print Buffer Printing to File 1. Convenient Print Functions You can spool a print job in the SD memory card installed in the printer. This function frees memory on your computer so it can handle other tasks faster while the printer is running in the background. Note ●● If the spooled data cannot be stored in the SD memory card because of a memory shortage, a message indicating that the data is invalid appears. ●● This function is not available with the OS X PS printer driver.
Downloading PS Files Note ●● This function is available only when you are using a TCP/ IP network. ●● The OKI LPR Utility is not available with the OS X PS printer driver. For OKI LPR Utility 1 Launch the OKI LPR Utility. 2 Select [Download] from the [Remote Print] menu. 3 Select the file to download and click [Open]. After finishing the download, the PostScript file is printed. You can print out the details of PostScript errors when they occur.
2. Adjusting Color This chapter explains various color adjustment methods. 2 Memo ●● In this chapter, Notepad will be used as an example of Windows, and TextEdit will be used as an example for OS X. The operation may differ depending on the application or the version of the printer driver you are using. 2. Adjusting Color Adjusting Color on the Control Panel This section explains the method of adjusting color for the printer using the control panel.
Adjusting Color on the Control Panel Adjusting the Color Balance (Density) You can adjust the density of each color. You can select a light, medium, or dark density for each color. 1 2. Adjusting Color Printing Color Swatch Press the key. Memo ●● When a printer is in the power saving mode, press the button to restore from the mode. 2 Enter <3>, <0> and <2> using the ten-key pad and press the button. 3 Make sure that [Execute] is selected and then press the button.
Adjusting Color with PS Gamma Adjuster Utility Adjusting Color with PS Gamma Adjuster Utility This section explains the PS Gamma Adjuster Utility. You can adjust the half-tone density of CMYK colors printed by the printer. Use this function if the color in a photograph or graphic is too dark. 2 Note ●● Printing speed may be slow if this function is used. If you want to prioritize the speed, select [Not Specified] from [Custom Gamma Adjustment]. 2.
Adjusting Color with PS Gamma Adjuster Utility 10 Select [Printers & Scanners] from Printing a File with the Adjusted Gamma Curve [System Preferences] to delete and reregister all printers for which adjustments were made. For Windows PS Printer Driver Open the file you want to print. 2 Select [Print] from the [File] menu. 3 Click on [Preferences] or [Properties]. 4 Select the [Color] tab, [Custom Calibration] and select the halftone adjustment settings and then click [OK].
3. Changing Printer Settings This chapter explains how to configure the equipment settings from the button on the operator panel. Checking the Current Settings 3 This section explains the basic procedure to print out print information. By printing out the print information, you can check the current settings of the printer. 3. Changing Printer Settings Printing Out Print Information You can print and check the printer configurations and a usage report.
Changing the Equipment Settings Changing the Equipment Settings This section explains the basic procedure to change the equipment settings. Reference ●● For details on the menu structure of the equipment settings, refer to “List of Each Setup Menu” P.33. Admin Setup Boot Menu To enter the [Admin Setup] menu, an administrator password is necessary. Boot Menu is used to change system settings. Only the administrator should use this menu.
Changing the Equipment Settings Other Settings 3 3. Changing Printer Settings 1 Press the scroll button or to open the equipment setting menu. 2 Press the scroll button to select the setup menu on which you want to change a setting and then press the button. 3 Change the setting and then press the button. 4 Press the button to exit the menu mode.
Changing the Equipment Settings List of Each Setup Menu Configuration Menu Item Tray Count A4/Letter Impressions Count Supplies Life Action Explanation MP Tray Tray 1 Color Displays the Displays the Displays the Displays the Displays the Displays the Displays the Displays the Displays the Displays the Displays the Displays the network. Displays the network.
Changing the Equipment Settings Item Action Explanation Network Wireless When there is (Infrastructure) built-in wireless Information LAN support and the Wireless Module is set to “Enable” (cont.
Changing the Equipment Settings Print Information Menu This menu provides a quick method of listing various items stored within the printer. Item Action Configuration Network Demo Page Execute Execute DEMO1 Execute Execute PS Font List Execute Error Log Execute Color Profile List Execute Job Log Execute Scroll down to this parameter and select execute demonstration page. Scroll down to this parameter and select execute list of job files. (Displayed only if FileSystem is installed).
Changing the Equipment Settings Menus Item Tray Configuration Action Explanation MPTray Config Paper Size: 3 3. Changing Printer Settings A3/A4 /A4 /A5 / A5 /A6/B4/B5 /B5 / B6 /B6 /B6 Half/ Legal14/Legal13.5/ Legal13/Tabloid/Letter / Letter /Executive/ 8.
Changing the Equipment Settings Item Tray Configuration (cont.) Action Explanation Media Weight: Light/Medium Light/ Medium/Heavy/ Ultra Heavy1/ Ultra Heavy2/ Ultra Heavy3 Tray Usage: Sets MPTray usage. Normal Tray/ When Mismatching/ [Normal Tray]: (Tray selection/switching) uses as a Do Not Use normal tray. [When Mismatching]: if paper mismatch occurs, paper is requested from the MPTray instead of the specified tray. [Do Not Use]: sets MPTray unavailable both in Auto Tray Select and Auto Tray Switch.
Changing the Equipment Settings Item Tray Configuration (cont.) Action Legal Paper Default: Other Size Default: Specifies the Legal paper size in Tray 1. Legal14 16K(184x260mm) 3 3.
Changing the Equipment Settings Item Print Adjust Action Print Position Adjust Default: 0.00 BG Setting +3/+2/+1/0/-1/-2/-3/ Default: 0 HU Setting Default: VL Cleaning Off Exeute Drum Cleaning Default: Off High Humid Mode Default: Off Moisture Control Default: Off Narrow Paper Speed Default: Mode1 Warmup Control Default: Off Quiet Mode Default: Off Select from X Adjust/Y Adjust/Duplex X Adjust/ Duplex Y adjust. Select by scroll and button. Define measurement. * Can be set per tray.
Changing the Equipment Settings Admin Setup Item Settings Enter Password Network Setup 3 xxxxxxxxxxxx Enabling Default Gateway Wired TCP/IP 3. Changing Printer Settings NetBIOS over TCP IP Address Set IPv4 Address Subnet Mask Gateway Address DHCPv6 Web Telnet FTP IPSec (if enabled) SNMP Network Scale Explanation Enter a password to gain entry to the Admin Setup menu.
Changing the Equipment Settings Item Network Setup (cont.
Changing the Equipment Settings Item Print Setup (cont.) Settings X Dimension 3 3. Changing Printer Settings Y Dimension PS Setup L1 Tray 2.5 inch ~ 8.3 inch ~ 8.5 inch ~ 11.7inch 64 mm ~ 210 mm ~ 216 mm ~ 297mm 3.5 inch ~ 11.0 inch ~ 11.7 inch ~ 52.
Changing the Equipment Settings Item Settings Private Print Setup Job Auto Search (cont.
Changing the Equipment Settings Item Time Setup (cont.) Settings Daylight Saving Setting method SNTP Server (Primary) 3 SNTP Server (Secondary) 3.
Changing the Equipment Settings Item Others Setup (cont.) Settings Storage Common Setup Check File System Execute Check All Sectors Execute Enable No Initialization Yes Language Setup Clear Job Log Access Control User Counter Report Select Language Job Cancel Setup Language Initialize Cancel Key Behavior Inquiry Display Execute Resolves mismatch between actual memory and displayed memory available in a file system. Performs administration data (FAT information) recovery.
Changing the Equipment Settings Item Others Setup (cont.) Settings Job Cancel Setup (cont.) Near Life Setup 3 3.
Changing the Equipment Settings Item Change Password Settings Explanation New Password xxxxxxxxxxxxxx Verify password xxxxxxxxxxxxxx Sets a new password to enter Admin Setup menu. From 6 to 12 alpha/numeric digits can be entered. Forces the User to input the new password to enter Admin Setup. From 6 to 12 alpha/numeric digits can be entered.
Changing the Equipment Settings Wireless(Infrastructure) Setting Item Wireless (Infrastructure) Setting 3 Settings Wireless(Infrastructure) Network Setting Enable Disable Auto Manual xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx IP Address Set IPv4 Address Subnet Mask Gateway Address DHCPv6 3. Changing Printer Settings Automatic WPS-PBC setup (WPS) WPS-PIN Wireless xxxxxx Network ......
Changing the Equipment Settings Wireless(Ap Mode) Setting Item Settings Wireless(AP Mode) Wireless(AP Mode) Setting Automatic Setup (PushButton) xxx.xxx.xxx.xxx Explanation Enables/Disables the wireless LAN (AP mode). When the button is pressed and the Yes/No confirmation screen is displayed, if Yes is selected, automatic connection can be started with a push-button. Displays the SSID and the password. Input the SSID. Input the password. Input the IP address. Sets the SSID and the password.
Changing the Equipment Settings Storage Common Setup Item 3 Settings Check File System Execute Check All Sectors Execute Explanation Resolves mismatch between actual memory and displayed memory available in a file system. Performs administration data (FAT information) recovery. Performs recovery only for an SD Card. Performs recovery of defective SD Card sector information and a file system mismatch mentioned above. Menu Lockout 3.
4. Using Utility Software This chapter explains useful software functions for using your printer. Overview of Utilities The following is a list of utilities that you can use for your printer. For details on how to use these utilities, refer to their respective sections. Utilities common to Windows OS X Item PS Gamma Adjuster Utility Function Scope Printing Details Refer to ●● Windows 10/Windows 8.1/ page.
Installing Utilities Installing Utilities If there is a utility that you would like to use, follow the procedure below for Windows. For OS X, you can copy it by dragging and dropping to the place you want. You can also run this directly from the Software DVD-ROM. For Windows 4 1 Insert the included “Software DVD-ROM” into a computer. 2 When [AutoPlay] is displayed, click [Run Setup.exe]. Memo 4. Using Utility Software ●● If the [User Account Control] dialog box is displayed, click [Yes].
Utilities common to Windows/OS X Utilities common to Windows/OS X This section explains web pages that can be used by both Windows and OS X. When using web pages, the following conditions must be met. ●● TCP/IP must be enabled. ●● One of the following must be installed: Microsoft Internet Explorer 6.0 or later, Safari 3.0 or later, or Firefox 3.0 or later. Memo ●● Either set your web page security settings to a medium level, or enable cookies.
Utilities common to Windows/OS X 3 Checking Printer Status Click [SKIP]. If you have made changes to the settings on this screen, click [OK]. You can check the status of your printer from the web page. 1 Launch your web browser and enter the printer’s IP address. The status of the printer is displayed. Memo ●● When logging in as the administrator, you can also click on [Status Window] in order to view the simplified display of the printer status.
Windows Utilities Windows Utilities This section explains utilities you can use in Windows. Configuration Tool In the Configuration Tool, you can manage multiple units and change settings. Registering the Printer When using the Configuration Tool or introducing a new printer, register the printer in the Configuration Tool. 1 Select [Start], [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool]. 2 Select [Register Device] from the [Tools] menu.
Windows Utilities Network Setting Plugin OKI LPR Utility You can set the network with the Configuration Tool. Prior to setting, please install the Network Setting plugin. You can use the OKI LPR utility to perform a print job via network, manage print jobs, and check the printer status. Reference Reference ●● For how to install Configuration Tool, please refer to “Installing Utilities” P.52. ●● For how to install OKI LPR utility, please refer to “Installing Utilities” P.52.
Windows Utilities Downloading Files Forwarding Jobs Automatically You can download a file to the printer you have added to the OKI LPR utility. If you cannot print because the selected printer is busy, offline or out of paper, you can configure the settings to forward the print jobs to another OKI printer automatically. 1 Launch the OKI LPR utility. 2 Select the download destination printer. 3 Select [Download] from the [Remote Print] menu. 4 Select a file and click on [Open].
Windows Utilities 6 Click on [Options]. 7 Click on [Add]. 8 Enter the IP address of the printer for simultaneously printing and click on [OK]. 9 Automatically Configuring the IP Address You can set it to ensure that the connection with the original printer is maintained even if the printer’s IP address is changed. Memo ●● The IP address may change if DHCP is being used to dynamically assign IP addresses or the network administrator manually changes the printer’s IP address. Click on [OK].
Windows Utilities Network Extension In Network Extension, you can check the settings on the printer and set the composition of the options. 4 Click [OK]. Reference ●● Click [Web Setting] to automatically launch the web page. You can change printer settings on this web page screen. For details, refer to “Web page” P.53. Setting Options Automatically You can get the composition of options of the connected printer and automatically set the print driver.
OS X Utilities OS X Utilities This section explains utilities you can use in OS X. Network Card Setup You can use the Network Card Setup to configure the network. Configuring Web Settings You can launch the web page, and configure the printer network settings. Enabling Web Settings 1 Start Network Card Setup. Reference 4 ●● “Installing Utilities” P.52 4. Using Utility Software In order to use Network Card Setup, TCP/IP needs to be activated. 2 Select this machine from the list.
5. Network Settings This chapter explains network settings for your printer. Changing Network Settings From the Web Page This section explains how to change the network settings from the printer’s web page. To access the printer’s web page, your computer must meet the following conditions. ●● TCP/IP must be enabled. ●● Microsoft Internet Explorer 6.0 or later, Safari 3.0 or later, or Firefox 3.0 or later is installed. Memo ●● Ensure that the security setting of the web browser is set to a medium level.
Changing Network Settings From the Web Page 8 Click [View a Summary of Current Configuration] to check the current settings, and then click [X] to close the window. Controlling Access Using IP Address (IP Filtering) You can control access to the printer using IP addresses. You can set whether to allow configuration or printing from the IP addresses specified. By factory default, IP filtering is disabled. You can also check the current settings of up to two addresses on the main window.
Changing Network Settings From the Web Page Controlling Access Using MAC Address (MAC Address Filtering) Encrypting Communication by SSL/TLS You can control access to the printer using MAC addresses. You can allow or reject access from the specified MAC addresses. You can encrypt communication between your computer and the printer. Communication is encrypted by SSL/TLS in the following cases. Note ●● Be sure to specify the correct MAC address.
Changing Network Settings From the Web Page 10 Click [Submit]. The setting procedure for a certificate issued by a certificate authority is finished. Enabling Encryption After creating a certificate, perform the following procedure to enable encryption. When you change the settings from the web page to enable encryption, communication is encrypted immediately after that change has been made. 1 5 3 Select [Network Setup] > [IPP] > [Settings]. 4 Select [Enable] in [IPP]. 5 Click [Submit].
Changing Network Settings From the Web Page Setting Up Your Printer As an IPP Printer (for OS X Only) Encrypting Communication by IPSec Add the printer to your computer as an IPP printer. 1 You can encrypt communication between your computer and the printer. Insert the software DVD-ROM into the computer and install the driver. The communication is encrypted by IPSec. When IPSec is enabled, encryption is applied for all the applications using IP protocols.
Changing Network Settings From the Web Page Configuring Your Computer [Diffie-Hellman group] at the time of configuration for "Phase1 Proposal" in “Configuring Your Printer” P.65. Memo ●● Be sure to configure the printer before configuring your computer. 15 Click [OK]. 1 Click [Start] and select [Control Panel] > [Administrative Tools]. 16 On the [Key Exchange Security 2 Double-click [Local Security Policy].
Changing Network Settings From the Web Page 47 Click [Finish]. 33 On the [Filter Action] screen, click [Add]. 48 On the IP security policy properties 34 On the [Filter Action Wizard], click window, click [OK]. [Next]. 49 On the [Local Security Policy] window, 35 On the [Filter Action Name] screen, select the new IP security policy. enter a [Name] and a [Description] and then click [Next].
Changing Network Settings From the Web Page Using SNMPv3 When you use an SNMP manager that supports SNMPv3, management of the printer can encrypted by SNMP. 1 Access the printer’s web page and log in as the administrator. 2 Select [Admin Setup]. 3 Select [Network Setup] > [SNMP] > [Setting]. 4 5 5 Follow the on-screen instructions to specify detailed settings. Using IPv6 Your printer supports IPv6. The printer obtains the IPv6 address automatically. You cannot set the IPv6 address manually.
Changing Network Settings From the Web Page Checking IPv6 Address Using IEEE802.1X The IPv6 address is automatically assigned. 1 Select [View Info]. 2 Select [Network] > [TCP/IP]. Your printer supports IEEE802.1X authentication. Be sure to configure the printer and your computer before performing the following steps. Reference Memo ●● When the global address is displayed only as zeros, it may be an error due to the router being used.
Changing Network Settings From the Web Page 3 Select [Network Setup]> [IEEE802.1X]. 4 Select [Enable] for [IEEE802.1X]. 5 Select [EAP-TLS] for [EAP Type]. 6 Enter a user name in [EAP User]. 7 Select [Do not use SSL/TLS Certificate for EAP authentication] and then click [Import]. 8 Enter the file name of the certificate. 9 Enter the password of the certificate and then click [OK]. Only a PKCS#12 file can be imported. 5 10 Select [Authenticate Server] and then 5.
Other Operations Other Operations This section explains how to initialize the network settings and how to set up your printer and computer to use DHCP. Initializing Network Settings Note ●● This procedure initializes all the network settings. 1 Press the button. 2 Press to select [Admin Setup] and then press the button. 3 Enter the administrator password using the ten-key pad. The factory default administrator password is “999999”.
Other Operations 8 Click [Start] and select [Administrative Tools] > [DHCP] to launch the [DHCP] wizard. 9 On the DHCP list, select a server to use. 10 From the [Action] menu, select [New Scope]. 11 On the [New Scope Wizard], follow the on-screen instructions and configure the settings as necessary. Memo ●● Be sure to configure the default gateway settings. ●● On the [Activate Scope] screen, select [Yes, I want to activate the scope now]. 12 Click [Finish].
6. Troubleshooting This chapter explains initializing, deleting and updating drivers. Initializing This section explains how to initialize an SD memory card and flash memory and how to reset the equipment settings to their defaults. You can delete data or settings stored on the printer to restore the settings to how they were at the time of purchase. Note ●● In the default settings, [Initialize] cannot be selected because [No] is selected for [Enable Initialization] of [Storage Setup] in [Boot Menu].
Initializing Formatting a Particular Partition You can initialize a particular partition within the SD memory card’s 3 partitions (PS, Common, and PCL). Initializing Flash Memory Flash memory stores data such as form data, etc. Use the following steps to initialize. Note ●● When you initialize a partition, the following data is deleted. Note ●● When you initialize flash memory, the following data is deleted.
Initializing Resetting the Printer Settings You can return the configured settings to their default. 1 Press the scroll button 2 Press to select [Admin Setup] and then press the button. 3 Enter the administrator password using the ten-key pad. or . The default password is “999999”. 4 Press the button. 5 Press to select [Settings] and then press the button. 6 Press to select [Reset Settings] and then press the button.
Deleting or Updating the Printer Drivers Deleting or Updating the Printer Drivers This section explains how to delete or update the printer drivers you are using. Note ●● The procedure and display may differ according to the printer driver and version of Windows or OS X you are using. Deleting a Printer Driver 10 If the [Remove Driver and Package] dialog box appears, click [Remove driver only.] or [Remove driver and driver package.] > [OK]. You can uninstall printer drivers.
Deleting or Updating the Printer Drivers Updating a Printer Driver You can update printer drivers. For Windows PS Printer Driver Note ●● You must be logged in as an administrator to complete this procedure. ●● Restart the computer before you start removing a printer driver. 1 Click on [Start] and then select [Devices and Printers]. 2 Right-click the Your Printer icon and select [Printing preferences].
Index A T Automatically set the date..... 54 TELNET............................... 68 B U Blurred Fine Lines................. 20 C Uninstall Printer Driver............... 76 Configuration Tool................. 55 Custom Sizes....................... 11 E Elongated Printing................ 11 F FTP..................................... 68 L LPD.................................... 68 M Maintaining Paper Size.......... 21 Multi-Purpose Tray................ 13 O OKI LPR Utility.....................
www.oki.