Extra Information

- 20 -
1
1. Convenient Print Functions
Emphasizing Fine Lines
You can print ne lines and small characters
clearer.
Memo
● This function is turned on by default.
● With some applications, if this function is turned on,
the spaces in bar codes may become too narrow. If this
happens, turn off this function.
For Windows PS Printer Driver
1 Open the le you want to print.
2 From the [File] menu, select [Print].
3 Click [Preferences] or [Properties].
4 Select the [Job Options] tab.
5 Click the [Advanced].
6 Select the [Adjust ultra ne lines]
check box and then click [OK].
7 Congure other settings if necessary and
then start printing.
For OS X PS Printer Driver
1 Open the le you want to print.
2 From the [File] menu, select [Print].
3 Select [Print Options] from the panel
menu.
4 Click the [Quality1] button from [Print
Options].
5 Select the [Adjust ultra ne lines]
check box.
6 Congure other settings if necessary and
then start printing.
Memo
● If setting details are not displayed in the print dialog
box for OS X, click [Show Details] at the bottom of the
dialog box.
Auto Tray Selection
You can set in the printer driver to automatically
switch paper feed trays with the same size of
paper loaded.
First, set on the operator panel for the MP tray
to be available for auto selection. Then, set the
auto selection of the tray with the printer driver.
Note
● Make sure to set a paper size for Tray1 and MP tray.
Available paper size differs depending on each tray. For
details, refer to the User’s Manual (Setup).
Memo
● In the default settings, the [Tray Usage] is [Do Not
Use]. When at default settings, the MP tray is not
supported by the auto tray switching function.
1 Press the <Fn> key.
Memo
● When a printer is in the power saving mode, press
the <POWER SAVE> button to restore from the
mode.
2 Enter <9> and <5> using the ten-key
pad and press the <ENTER> button.
3 Press the scroll button to select
[When Mismatching] and then press
the <ENTER> button.
4 Press the <ON LINE> button to exit the
menu mode.
5 Specify a paper tray in the printer driver
and start printing.
For Windows PS Printer Driver
1 Open the le you want to print.
2 From the [File] menu, select [Print].
3 Click [Preferences] or [Properties].
4 Select the [Paper/Quality] tab.
5 Select [Automatically Select] from
[Paper Source].
6 Congure other settings if necessary and
then start printing.