Extra Information

- 39 -
Changing the Equipment Settings
3
3. Changing Printer Settings
Item Action Explanation
Print Adjust Print Position Adjust
Default: 0.00
Select from X Adjust/Y Adjust/Duplex X Adjust/
Duplex Y adjust. Select by scroll and <ENTER>
button. Dene measurement.
* Can be set per tray.
Paper Color Setting
-2/-1/0/+1/+2
Default: 0
Used for ne adjustment of the colour print on paper.
Trans. Color Setting
-2/-1/0/+1/+2
Default: 0
Used for ne adjustment of the colour print on lms.
SMR Setting
+3/+2/+1/0/-1/-2/-3/
Default: 0
To correct variations in print results caused by
temperature/humidity conditions and difference in
print density/frequency.
Change the setting when print quality is uneven.
BG Setting
+3/+2/+1/0/-1/-2/-3/
Default: 0
To correct variations in print results caused by
temperature/humility conditions and difference in
print density/frequency.
Change the setting when background is dark.
HU Setting
Default: Off
Set the device before using it if it is not used for a
long time.
VL Cleaning Exeute If you do this when there are white stripes in the
perpendicular direction, printing quality may improve.
Drum Cleaning
Default: Off
Sets whether to rotate the drum in idle prior to
printing in order to reduce horizontal white lines.
Be warned that this will shorten the ID life by as
much as this rotation. Select by scroll and <ENTER>
button.
High Humid Mode
Default: Off
Sets the curling reduction mode to on/off.
Moisture Control
Default: Off
Sets the condensation control. When the
condensation control is set, it may take more time to
print the rst page.
[Mode1]: Performs condensation control.
[Mode2]: Performs stronger condensation control.
[Off]: Does not perform condensation control.
Narrow Paper Speed
Default: Mode1
Sets the speed of printing on narrow paper.
[Normal]: The print speed is not changed when
narrow paper is printed.
[Mode1]: The print speed is slowed when narrow
paper is printed.
[Mode2]: You need to wait for a while when using
wide paper after printing on narrow paper.
Warmup Control
Default: Off
If you mind the sound at startup, switch it to [On].
In normal conditions, keep it [Off].
Quiet Mode
Default: Off
If you mind the operation sound during printing,
switch it to [On]. The print speed will be slowed.