Extra Information

- 42 -
Changing the Equipment Settings
3
3. Changing Printer Settings
Item Settings Explanation
Print Setup
(cont.)
X Dimension 2.5 inch
~
8.3 inch
~
8.5 inch
~
11.7inch
64 mm
~
210 mm
~
216 mm
~
297mm
Species paper width of Custom paper as a
default value.
Sets a paper size at right angles to the
paper run direction.
Y Dimension 3.5 inch
~
11.0 inch
~
11.7 inch
~
52.0 inch
90 mm
~
279 mm
~
297 mm
~
1321 mm
Species paper length of Custom paper as a
default value.
Sets a paper size in the same direction as
the paper run direction.
PS Setup L1 Tray Type1
Type2
The selectable tray number on the level
1 operator ranges from 1 with the setting
Type1 and from 0 with Type2.
Network Protocol ASCII/RAW Species PS communication protocol mode
of data from NIC port.
(In RAW mode, Ctrl-T is invalid). PS models
only.
USB Protocol ASCII/RAW Species PS communication protocol mode
of data from USB port.
(In RAW mode, Ctrl-T is invalid). PS models
only.
Private Print Setup Verify job option Enable
Disable
Selects whether or not to perform job
verication prior to printing an encrypted
secure job.
Erase job option No overwrite
Zero out once
Sets the method of erasing encrypted secure
jobs from the device storage (SD card).
Keep job for 15minutes
30minutes
1hour
2hours
4hours
8hours
12hours
1day
2days
3days
4days
5days
6days
7days
Sets the retention period of encrypted
secure jobs in the device storage (SD card).
After the retention period, the encrypted
secure jobs will be erased from the device
storage (SD card) automatically.
Job Limitation Disable
Private Print only
If [Private Print only] is selected, other
jobs than private print will be excluded.
Verify job password On
Off
Selects whether or not to verify the job
password when access control is enabled.