Extra Information

- 43 -
Changing the Equipment Settings
3
3. Changing Printer Settings
Item Settings Explanation
Private Print Setup
(cont.)
Job Auto Search On
Off
Selects whether or not to perform a job
search once the panel is unlocked when
access control is enabled.
Color Setup CMY 100% Density Enable/Disable Enable/Disable 100% output against the
CMY100% TRC compensation. Ordinarily,
the TRC compensation function holds control
for the appropriate print density; thus 100%
output is not always possible.
Selecting [Enable] will enable 100% output
in any individual color. The actual print,
including the TRC compensation function is
limited to an appropriate area. This function
is for special purposes such as specication
in CMYK color reduction in PS.
Panel Setup Near Life Status Enable
Disable
Sets the LCD display control when a near life
warning occurs for the drum, fuser and belt.
With [Enable], a near life warning will be
displayed.
With [Disable], a near life warning will not
be displayed (not output to the Attention
LED/PJL/MIB/Web as well).
Excludes the temporary recovery status (life
warning) by opening and then closing the
cover after a life warning has occurred.
Near Life LED Enable
Disable
Sets the LED lighting control when a near
life warning occurs for the toner, drum,
fuser, belt and waste toner box.
With [Enable], the Attention LED will light
on.*
With [Disable], the Attention LED will not
light on.
Excludes the temporary recovery status (life
warning) by opening and then closing the
cover after a life warning has occurred.
* For the drum, fuser, belt and waste toner
box, this setting is applied only when [Panel
Setup] > [Near Life Status] is set to
[Enable].
For the toner, this setting is applied
regardless of the setting of [Panel Setup] >
[Near Life Status].
Idle Display Toner Gauge
Paper Size
Selects the information to be displayed on
the standby screen. With [Paper Size],
displays the paper size for each tray. The
default is the [Toner Gauge].
Panel Contrast -10
~
0
~
+10
Adjusts the contrast value of the operator
panel LCD.
Buzzer Setup Paper Jam Error Buzzer
Volume
Off
Low
High
Sets the buzzer volume when a paper jam
occurs.
Time Setup Date Format mm/dd/yyyy
dd/mm/yyyy
yyyy/mm/dd
Set desired date format.
Time Zone -12:00
~
0:00
~
+13:00
Enter the time zone for your country in
relation to GMT.
Set in quarter units within the range.
Use the Menu up/down buttons to
increment/decrement and press the
<ENTER> button to set and proceed to the
next digit.