Extra Information

- 44 -
Changing the Equipment Settings
3
3. Changing Printer Settings
Item Settings Explanation
Time Setup
(cont.)
Daylight Saving On
Off
Enable/Disable daylight saving setting.
Setting method Auto Setup
Manual Setup
Sets the time setting method.
SNTP Server (Primary) ************ Sets the SNTP server (primary)
[Display Conditions]
[Admin Setup] > [Time Setup] >
[Setting method] is set to [Auto Setup].
SNTP Server (Secondary) ************ Sets the SNTP server (secondary).
[Display Conditions]
[Admin Setup] > [Time Setup] >
[Setting method] is set to [Auto Setup].
Time Setting 01/01/2000
00:00
~
01/01/2009
00:00
~
31/12/2091
23:59
Set current date and time.
Display format follows the settings selected
in Date Format.
Power Setup Auto Power Off Enable
Auto Cong
Disable
Sets the behavior of [Auto Power Off].
[Enable]: Changes to the off mode even
when the network is connected.
[Auto Cong]: Does not change to the
off mode when the network is connected.
Changes to the off mode even when the USB
cable is connected.
[Disable]: Disables the off mode transition
by the elapsed time.
Tray Setup Unit of Measurement inch/millimeter Species the unit for custom paper sizes.
Default Paper Size A4/Letter Sets the default paper size.
Others Setup RAM Setup Receive
Buffer Size
Auto
0.5 megabyte
1 megabyte
2 megabyte
4 megabyte
8 megabyte
16 megabyte
32 megabyte
Sets the incoming buffer size.
Resource
Save
Auto
Off
0.5 megabyte
1 megabyte
2 megabyte
4 megabyte
8 megabyte
16 megabyte
32 megabyte
Sets the resource saving area size.
Flash
Memory
Setup
Initialize Execute Initialize the ash memory.
SD Card
Setup
This item is displayed only if the SD card (option) is installed.
Initialize Execute Initializes the SD Card to the factory default
setting.
Format
Partition
PCL
Common
PS
Formats a specied partition.
Erase SD
Card
Execute It features of the deletion of all the data
stored in the SD Card not to be recovered
them.