Extra Information

- 48 -
Changing the Equipment Settings
3
3. Changing Printer Settings
Wireless(Infrastructure) Setting
Item Settings Explanation
Wireless
(Infrastructure)
Setting
Wireless(Infrastructure) Enable
Disable
Enables/Disables the wireless
LAN (Infrastructure).
Network
Setting
IP Address Set Auto
Manual
Sets the IP Address setting
method.
IPv4 Address xxx.xxx.xxx.xxx Sets the IP Address.
Subnet Mask xxx.xxx.xxx.xxx Sets the Subnet Mask.
Gateway Address xxx.xxx.xxx.xxx Sets the Gateway (default
router) address.
DHCPv6 Enable
Disable
Sets enable/disable of
DHCPv6.
Automatic
setup (WPS)
WPS-PBC Executes WPS-PBC.
WPS-PIN Executes WPS-PIN.
Wireless
Network
Selection
xxxxxx
......
Lists the detected wireless LAN
(AP mode).
Manual
Setup
SSID Input the SSID.
Security Disable
WEP
WPA/WPA2-PSK
WPA2-PSK
WPA/WPA2-EAP
WPA2-EAP
Sets the security function of
the wireless LAN.
* [WPA/WPA2-EAP] or [WPA2-
EAP] can be displayed only when
it is set from the web, and it
cannot be set from the menu.
WEP Key Input the WEP key.
WPA
Encryption
Type
AES
TKIP/AES
Displays the WPA encryption
type.
The setting is carried out
automatically according to the
setting of [Security]. (You
cannot change the setting
manually with this menu.)
It changes to [AES] when
[Security] is set to [WPA2-PSK] or
[WPA2-EAP] and to [TKIP/AES]
when [Security] is [WPA/WPA2-
PSK] or [WPA/WPA2-EAP].
[Display Conditions]
[Security] is set to any other
item than [Disable] and
[WEP].
WPA
Preshared
Key
Input the pre-shared key.
Execute Enables the setting.
Wireless reconnection Execute Reconnects to the wireless LAN.