Operation Manual

- 120 -
Specications
5
5. Appendix
 Printing Specications
Pro8432WT
Printing method Dry electrophotographic recording method with LED (Light-emitting diode)
Emulation language PostScript 3
Resident fonts PS: 80 european fonts
Resolution 600 x 600 dpi, 600 x 1200 dpi, 600 x 600 dpi 2bit
Color Yellow, Magenta, Cyan, White
Print speed (A4) Simplex: 35 ppm
Paper size Tray 1 Legal 13/13.5/14, letter, executive, tabloid, A3, A4, A5, B5, B4, A6, B6,
Statement, 8.5SQ, Folio, custom size, 8K (260 x 368 mm, 270 x 390 mm, 273 x
394 mm), 16K (197 x 273 mm, 195 x 270 mm, 184 x 260 mm)
MP Tray Legal 13/13.5/14, letter, executive, tabloid, statement, A3, A4, A5, B4, B5, A6,
B6, B6 Half, 8.5SQ, Folio, 4x6inch, 5x7inch, index card (3 x 5 inch), custom size,
8K (260 x 368 mm, 270 x 390 mm, 273 x 394 mm), 16K (197 x 273 mm, 195 x
270 mm, 184 x 260 mm)
Custom size ● Tray 1
105 - 297 mm (W), 148, 182 - 431 mm (L)
(4.1 - 11.7 inches (W), 5.8 - 17.0 inches (L))
● MP tray
64 - 297 mm (W), 90 mm - 431 mm (L)
(2.5 - 11.7 iinches (W), 3.5 inches - 17.0 inches (L))
Media type Plain paper (64 g/m
2
- 256 g/m
2
), letterhead, transparency, bond, recycle, card
stock, rough
Feeding method Automatic feeding from the tray 1 and MP tray
Manual feeding from MP tray
Paper loading capacity ● Tray 1
300 sheets of Standard paper /80 g/m
2
, total thickness 30 mm or lower.
● MP tray
100 sheets of Standard paper /80 g/m
2
and total thickness 10 mm or lower, 10
envelopes/ weight of 85 g/m
2
.
Output method Face up/Face down
Paper output capacity ● Face up
100 sheets (less than 80 g/m
2
), 10 sheets (ultra-heavy/envelopes)
● Face down
200 sheets (less than 80 g/m
2
)
Print guaranteed area 6.35 mm or more from the paper edge (not applicable to special media such as
envelopes)
Print precision Print beginning:± 2 mm, paper skew:± 1 mm/100 mm,
image expansion:± 1 mm/100 mm (80 g/m
2
)
Warm-up time ● From power on
32 seconds (at room temperature 25°C, rated voltage)
● From power save mode
27 seconds (at room temperature 25°C, rated voltage)
Operating environment ● When in operation
10 - 32°C / Relative Humidity of 20 - 80% (maximum wet bulb temperature of
25°C, maximum dry bulb temperature of 2°C)
● When not in operation
0 - 43°C / Relative Humidity of 10 - 90% (maximum wet bulb temperature of
26.8°C, maximum dry bulb temperature of 2°C)
Conditions for the guarantee
of print quality
● Operating Range
Temperature 10°C, humidity 20 to 80% RH
Temperature 32°C, humidity 20 to 60% RH
Humidity 20% RH, temperature 10 to 32°C
Humidity 80% RH, temperature 10 to 27°C
● Full-color Print Quality Assured Range
Temperature 17 to 27°C, humidity 50 to 70% RH
Consumables, Maintenance
Unit
Toner cartridges, image drum, belt unit, fuser unit, feed roller set