Operation Manual

- 26 -

Preparing Your Printer

1. Setup

Installing the 16-GB SD Memory

Card Kit

For storing print data, install the SD memory

card kit.

SD memory socket

SD memory card

Memo

● The SD memory socket is attached to the SD memory

card.

Note

● Use only genuine Oki Data products. The performance

cannot be guaranteed when using other products.

● The static electricity may cause damage to the parts.

Discharge the static electricity in your body by touching

grounded metallic parts, etc. before work.

● You can not use the SD memory card with the protection

switch for accidental overwriting locked. Make sure to

release the lock.

1 Turn off your printer, and then unplug

the AC cord and Ethernet or USB cable.

Reference

● “Turning Off the Power” P.22

2 Open the access cover (1).

3 Remove the metal plate (2) by sliding it

upward.

(1) Put your nger in the recess of the

metal plate (2), and slide it upward.

(2) Pinch the lower part of the metal

plate (2), and pull it forward.

4 Make sure the LED (3) indicated by the

arrow turns off. If it is lit, wait until it

turns off.