Operation Manual

- 50 -

How to Print from the MP Tray

2. Printing Basic Operation

Note

● The paper may be wrinkled or curled after printing.

● Use paper stored in proper temperature and humidity

conditions. Do not use paper that is curled or waved

because of humidity.

● Do not print on the back side of paper on which other

printer has printed.

● Curling of a postcard or an envelope may cause the ink

absorbing problem. Use paper that is not curled. Correct a

paper Curling within 2 mm.

7 Close the paper set cover (5).

If always printing on same size or type paper

from the MP tray, register the paper on the

operator panel. If printing once, proceed to the

step 18.

Note

● When a printer is in the power saving mode, press

the <POWER SAVE> button to restore from the

mode.

● Make sure that the message “Ready To Print” is

displayed in the operator panel. If the message is not

displayed, press the <ON LINE> button.

8 Press the <Fn> key.

9 Enter “90” and press the <ENTER>

button.

10 When [Paper Size] is displayed, select

the size of the loaded paper and then

press the <ENTER> button.

Reference

● If [Custom] is selected for [Paper Size], you need

to register the custom size. For how to register the

custom size, refer to “Printing in Custom Sizes”

P.52.

11 Press the <BACK> button until

[MPTray Cong] is displayed.

12 Press the scroll button to select

[Media Type] and then press the

<ENTER> button.

13 Press the scroll button to select the

type of the loaded paper and then press

the <ENTER> button.