User Instructions

Issue department：Bedding Division Date：
2019-9-5
ProductFunction
instruction
Author：
TOM
No：CU458-2
CU458‐2
Version： 1.1
Page 4 of 5
4
3.8. PairFunction
DoubleclickRESETbutton，pairingLEDturnson，thecontrolboxentersintomodeofcodeparing；
PressandholdtheparingLEDofRemote,thebacklightofparingLEDflashes,thebacklightofremoteflashes,the
remoteentersintomodeofcodeparing;
ThebacklightofparingLEDofremotestopsflashing,andtheparingled ofcontrolboxturnsoff,itindicatesthat
thecodeparingissuccessful;
Iffails,repeatalltheprocessesabove;
3.9. Bluetooth Pairing Control Test
Whenthebluelightofthecontrolboxisflashing,thepairingoperationisperformed:
1. Openthejerome’sappandpassthegearintheupperrightcorner;
2. Click"connecttobed"tojumptothedevicelist.
3. Inthedevicelistinterface,pulldownandrefresh,seethedevicenameis“OKIN‐0xxxxx”,clicktoconnect;
4. ThepairingpromptwillpopupontheIOSdevice, andclick“pairing”.Afterthepairingiscompleted,returnto
themaininterfacetorealizetheoperationcontrol.