User's Manual

OKIN Refined Electric Technology Co.,Ltd
Page 2 of 4
B.
HEAD button：Press and hold the button, the head motor will go up or down.
C.
FEET button：Press and hold the button, the foot motor will go up or down.
D.
Z-G button: Press the button, the head and foot motor will move simultaneously
and do not stop until return to the position of the system set. You can press any button to
stop action during moving.
Optional：The Z-G button can be set as a memory button by user. See point 4.
E.
FLAT button：Press the button, the head and foot motor will move down to the flat
position simultaneously. You can press any button to stop action during moving.
F.
HEAD Massage button：Press the button + or -，you can open the head vibrator and
control the vibrating range（+Stronger, -Weaker）. The vibrating range is divided into 3
levels and the default vibrating time is 10min.
G.
FEET Massage button：Press the button, you can open the foot vibrator and control
the vibrating intensity (+Stronger, -Weaker). The vibrating intensity is divided into 3 levels
and the default vibrating time is 10min.
H．
STOP button：Press the button, you can stop the head and foot vibrator and the
massage system will close.
Note：The vibrating intensity of the head vibrator is a little stronger than the foot vibrator.
3、Wireless Matching operation
Before use the whole system, user need match the handset with control box.
Step 1: Connect the whole system according to “System Diagram-Scape Bed Controls”
Step 2: Power off the system, plug off the mains cable with power socket;
Step 3: Take out the dry batteries of handset, set up DIP switch to a desired channel. Then
install the batteries;
Step 4: Power on the control box;