User's Manual

嘉兴礼海电气科技有限公司
OKIN Refined Electric Technology Co.,Ltd
Page 16 of 23
ALL of the Zero gravity position and the Memory A position and the Memory B
position can be rest to default by pressing and holding the button for
approximate six seconds until the backlight LEDs finally stop flashing from first
flashing.
L. FLASHLIGHT button：Click the button, the Flashlight on the remote control will turn
on if it is being off or turn off if it is being on. If the Flashlight is turning on as the button
pressed, it will keep on as long as the button pressed. When the button is released, the
Flashlight will still keep on for several seconds then turn off with the backlight turning off
together.
M. Massage INTENSITY ICREASEMENT button：
Click the button the vibrating intensity will raise up one level, total 3levels.
N. Massage INTENSITY DECREASEMENT button：
Click the button the vibrating intensity will lower down one level, total 3 levels.
The number of level represents the vibrating intensity. More big number of the level,
more strongly vibrating it is. The strongest vibrating is level 3, and the weakest is level 1.
Implement adjustment of the vibrating intensity is the way known as “PWM”. Different
duty cycle of PWM makes different intensity. The value of the duty cycle corresponding to
the level is below:
Duty cycle Level
20% 1
35% 2
50% 3
O. Massage SPEED INCREASEMENT button：
If the vibrating has started up, click the button, the vibrating speed will raise up one
level, total 4 levels.