User's Manual

OKIN Refined Electric Technology
Co.
, Ltd
Page 4 of 6
all massage motor), And then click to restore the head massage continuous vibration;
Follow-up to adjust the intensity of massage, according to the intensity of the switch after
the head massage motor;
N. In the wave open state，Click turn off the wave mode (that is, turn off
all massage motor), And then click to restore the head massage continuous vibration;
Follow-up to adjust the intensity of massage, according to the intensity of the switch after
the head massage motor;
O. Massage INTENSITY DECREASEMENT button：Click the button the vibrating
intensity of the head vibration mode will lower down one level, total 3 levels. Press the
button again, the vibration intensity cycle to the most advanced level 3;
P. Massage INTENSITY DECREASEMENT button：Click the button the vibrating
intensity of the foot vibration mode will lower down one level, total 3 levels. Press the
button again, the vibration intensity cycle to the most advanced level 3;
R.
Massage time button：Press the button and released to stop all moves （including
the actuators and vibrator） and change circularly the vibrating time of the vibrator
（10min-20min-30min-10min） by one level once, total 3 levels。
The time means that vibrating keeps on for this period then automatically stops if no
any button related to vibrating is pressed again. The time and the LED indication are
below:
K. FLAT button: Click the button, the Head and Foot actuator will start up and keep
running until arriving to the FLAT position. Running can be stopped by clicking any button.
L. UNDERLIGHT button ：Click the button, the Under-light under the bed will turn on
if it is being off or turn off if it is being on. If the Under-light is turning on as the button
pressed, it will keep on for 5 minutes then turn off automatically if the button isn’t pressed
again.
M. In the wave open state，Click turn off the wave mode (that is, turn off