System Instruction
Table Of Contents
Issue Department: Date:
2018.11.15
System Instruction
Author:
Instruction of RF28
Edition:
1.1
Page 3 of 4
3/4
2.5 Head up
Press and hold HEAD UP button of remote, head actuator moves out, stop when
released;
2.6 Head down
Press and hold HEAD DOWN button of remote, head actuator moves in, stop when released;
2.7 Foot up
Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released;
2.8 Foot down
Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released;
When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head
andfoot actuators start moving;
2.9 Flat
Click FLAT button, the bed goes flat, stop when click any button during the process of going flat;
2.10 Under bed light
Click the under bed light button, the under bed light switch its on/off state; After the under bed
light opens, if do not manually close, it will automatically turn off after 5 minutes;